Editing The Config Files; Securing The Cellx Box - TELES CellX Box series System Manual

5 Adapting the config files
This chapter describes some frequent configuration scenarios.
5.1

Editing the config files

To edit configuration files, connect to the CELLX Box using the GATE Manager, as described
in Chapter 4.4 Connecting to the CELLX Box with GATE Manager on page
Change to Directory view by selecting Directory in the menu in the left pane.
GATE Manager lists all of the files on your CELLX Box. The configuration files are shown in
the upper left quarter.
To change a configuration file, right-click the file name and select Download from System.
This copies the file to your computer. CELLX Box configuration files are standard text files and
can be edited with a text editor, such as Notepad++.
When you have completed the changes, save the file and close the editor. To send the new
file back to your CELLX Box, right-click in the GATE Manager window and select Upload to
System. Then select the changed version of the configuration file you want to send back to
the CELLX Box.
If you upload a new version of the
you want to activate the new configuration. Confirm with OK.
pabx.cfg
Changes in the
ager.
Note: The CELLX Box can take up to 3 minutes to reboot and apply your settings.
5.2

Securing the CELLX Box

To enhance the security of your CELLX Box, set a password for the GATE Manager and if the
CELLX Box is used directly with the Internet, configure the firewall.
CELLX box 17.1/002
route.cfg configuration file, GATE Manager will ask if
ip.cfg
or require a restart of the CELLX Box. Close the GATE Man-
26.
Page 44