Adjustment; Cleaning And Care; Guarantee; Disposal - Waeco Mobitronic ECL-100 Installation And Operating Manual

_ECL-75_100.book Seite 20 Freitag, 22. Juli 2005 5:01 17

Adjustment

7 Adjustment
Basically these works are to be executed only by a specialist since a wrong
adjustment of the switching on/off voltages can lead to malfunctions of the air-
conditioning unit or/and the electrics of the vehicle can fail.
The voltage scale illustrated on the charging current distributor serves as aid
to orientation. If other values are to be adjusted, then these have to be
controlled with a suitable voltage indicator. For this purpose, an external
adjustable laboratory power unit can be connected to the terminals GND and
D+.
➤
Insert the screwdriver into the axis of the potentiometer (see Illustration 5 on page 7).
Clockwise rotation increases the threshold of the voltage, anti-clockwise rotation
reduces the threshold of the voltage.
A cut-out voltage below 11.5 V is not recommendable according to our current
state of knowledge.
8

Cleaning and care

Caution!
Do not clean the device under flowing water or in soapy water.
Caution!
Do not use abrasive cleaning agents or hard objects during cleaning as these
can damage the device.
➤
Clean the exterior of the device with a damp cloth.
9

Guarantee

Our general guarantee conditions apply. If the product is defective, please return it to the
WAECO branch in your country (see the back of the instruction manual for the addresses)
or to your dealer. For repair and guarantee processing, please include the following
documents when you send the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
10

Disposal

➤
Place the packaging material in the appropriate recycling waste bins wherever
possible.
If you need to scrap the device, ask your local recycling centre or specialist
dealer for details about how to do this in accordance with the applicable disposal
regulations.
20
charging current distributor