Conserve switch surge protector with remote (11 pages)
Summary of Contents for Belkin PM01629
Page 2
Step 1: Plug equipment into “Always On” outlets. These outlets are for devices that need continuous power, such as: • Digital video recorders • Cordless phones Wireless Wireless routers Wireless Router Router Cordless Cordless Cordless phones Phone Phone Step 2: Plug equipment into “Remote Switched” outlets. These outlets are controlled by the remote switch and are for devices that do not need constant power or go into standby mode, such as: • Printers...
Page 3
Step 3: Plug Conserve power cord into the wall outlet. Step 4: Remove the remote switch and wall-mount from the box. Mounting screws are not included; see User Guide for wall-mount installation. Step 5: Pull and remove the clear battery tab from the back of the remote switch. Remove Pull before using.
Page 4
Switched” outlets. Step 11: Turn on and use your equipment as normal. Repeat Step 8 when done. For complete instructions, see the User Guide enclosed or visit www.belkin.com/conserve. I = ON O = OFF I = ON O = OFF...