Advertisement
Quick Links
Helpful Tips
Protein skimmers only work in saltwater. A steady specific gravity of 1.023-
✪
1.025 is recommended.
It is recommended that the sump water level stays stable at all times. The use
✪
of dedicated baffles or auto top off unit allows for more stable filtration from
the protein skimmer.
Never adjust a skimmer after servicing the aquarium or feeding.
✪
Skimmer pumps are normally louder during the first 2-3 weeks until a
✪
bacterial coat lubricates the rotor.
Safety
- Never allow the skimmer pump to run dry.
- Do not insert/pull the power plug with wet hands.
- Only clean the skimmer with vinegar and water.
- When servicing the skimmer please remove the plug from the power socket first.
- Must be used with intended power source only.
Warranty
- One (1) year warranty on pump and skimmer body.
IceCap is not responsible for consequential damages arising from installation or use of this
product. IceCap warrants the pump to be free from defects in material and workmanship under
normal use and conditions for the warranty period from the date of purchase. CoralVue's
liability under this warranty shall be limited to repairing or replacing at CoralVue's discretion,
without charge. CoralVue will not be liable for any cost of removal, installation, transportation,
or any other charges which may arise in a warranty claim.
NOTE:
This warranty is void if the product is damaged through abnormal operating conditions,
accident, abuse, misuse, unauthorized
alteration or repair. This warranty is non-
transferable. Consumable spare parts are not
applicable to the warranty.
*IceCap reserves the right to change/modify
this product without notice.
Thank you for
purchasing the
IceCap K2
Protein Skimmer.
In order to save on
unnecessary waste
with elaborate printed
documents that no one reads, we
have assembled online guides and
video tutorials that cover the basic
essentials of how to assemble, setup
and operate your new skimmer.
Please fill out the product
registration form online at:
coralvue.com/register
K2 -50
QUICK START GUIDE
PLEASE READ
BEFORE INSTALLING
Advertisement
Summary of Contents for IceCap K2-50
- Page 1 IceCap is not responsible for consequential damages arising from installation or use of this unnecessary waste product. IceCap warrants the pump to be free from defects in material and workmanship under with elaborate printed normal use and conditions for the warranty period from the date of purchase. CoralVue’s liability under this warranty shall be limited to repairing or replacing at CoralVue’s discretion,...
- Page 2 1: Screw(1pcs) 2: Silencer Assemble Accordingly 3: Top Cover Locate, inspect and identify all components supplied with your new protein skimmer. Please refer to the parts and assembly diagram. Parts & Install in Sump Assembly 4: Collection Cup Diagram Carefully install the skimmer in your sump at the suggested water depth. The optional mounting bracket can be used to suspend the the skimmer along side of sump.