Summary of Contents for C Prox Ltd PN10
- Page 1 C Prox Ltd (inc Quantek) 59 Sheffield Road, Dronfield, S18 2GF +44(0)1246 417113 sales@cproxltd.com www.quantek.co.uk Access Control Proximity Reader PN10 User Manual Please read the manual carefully before installing this unit...
-
Page 2: Packing List
Please ensure that all the above contents are correct. If any are missing please notify us immediately 2. Description The PN10 is a waterproof standalone or Wiegand access control proximity reader. It uses an advanced microprocessor with a high capacity flash memory for up to 10,000 users. Users can be added and deleted via admin cards making it very simple to operate. -
Page 3: Installation
5. Installation • Remove back plate from the reader using security driver supplied, and use it (or the template) to mark the two fixing holes and one cable hole. • Secure back plate to the wall using fixing screws provided. •... - Page 4 7. Factory reset & set management cards Turn off power to the unit. Connect the two pink wires then power on. After the beep, the factory reset is complete and the LED will turn green. Now it is necessary to learn the admin cards again. Read the first card as the admin add card, and the second card as the admin delete card.
- Page 5 9.5.2 Use card number to delete user .Card number. .#. .Card number. .#. … Multiple cards can be deleted without exiting programming mode. 9.5.3 Delete all users .2. .0000. .#. Note: This operation will delete all users, but admin card won’t be deleted. 9.6 Safe mode setting 9.6.1 Normal mode (Factory default) .3.
- Page 6 11. Advanced applications 11.1 PN10 works as a slave reader, connecting to a controller PN10 supports Wiegand output. It can be connected to a controller which supports Wiegand 26 input as its slave reader. 11.2 PN10 works as a controller, connecting to a slave reader PN10 supports Wiegand input, any card reader which supports Wiegand 26 interface can connect to it as a slave reader.
- Page 7 11.3 Two devices interconnected – Single Door Install one unit indoor and another outdoor, the indoor unit as a controller, the outdoor unit as a reader. This has the following features: • Users can be enrolled on either device. • The information on the two devices can be communicated, so in this case the user capacity for one door can be 20,000.
-
Page 8: Issue Date
11.4 Two devices interconnected and interlocked – Two doors The connection, as shown below, is for two doors. Each door has one device and one lock. The interlock function must be turned on in the settings. When either door is unlocked and opened, it must be shut before the other door can be opened.