Key To Symbols And Safety Instructions; Key To Symbols; Safety - Bosch BGH96 Troubleshooting Manual

4 | Bosch 96% AFUE Gas Furnace

1 Key to Symbols and Safety Instructions

1.1 Key to Symbols

Warnings
W arnings in this document are identifi ed by a warning
triangle printed against a grey background.
Keywords at the start of a warning indicate the type and
seriousness of the ensuing risk if measures to prevent the
risk are not taken.
The following keywords are defi ned and can be used in this document:
DANGER indicates a hazardous situation which, if not avoided,

will result in death or serious injury.
WARNING indicates a hazardous situation which, if not

avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not

avoided, could result in minor to moderate injury.
NOTICE is used to address practices not related to personal

injury.
Important information
T his symbol indicates important information where
there is no risk to people or property.
Data subject to change

1.2 Safety

Please read all instruction in the manual and retain all manuals for future
reference.
WARNING:

Untrained personnel (homeowners) may only clean
and replace filters and replace fuses as required
by basic maintenance. All other operations,
including installation, repair, and service must be
performed by a qualified installer, service agency,
or the gas supplier.
WARNING: FIRE OR EXPLOSION HAZARD

Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.

WHAT TO DO IF YOU SMELL GAS:
—
Do not try to light any appliance.
—
Do not touch any electrical switch; do not use any
phone in your building.
—
Leave the building immediately.
—
Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
—
If you cannot reach your gas supplier, call the fire
department.

Installation and service must be performed by a
qualifi ed installer, service agency, or the gas supplier.
WARNING:

Do not use this furnace if any part has been under
water. A fl ood-damaged furnace is extremely
dangerous. Attempts to use the furnace can result
in fi re or explosion. A qualifi ed service agent must
inspect the furnace and replace all gas controls,
control system parts, and electrical parts that have
been wet, or the furnace if deemed necessary.
WARNING: FIRE OR EXPLOSION HAZARD

The furnace is designed and approved for use with
Natural Gas and Propane (LP) Gas ONLY.

DO NOT BURN ANY LIQUID FUEL OR SOLID FUEL IN
THIS FURNACE.

Burning any unapproved fuel will result in damage to
the furnace's heat exchanger, which could result in
Fire, Personal Injury, and/or Property Damage.
Troubleshooting Guide
01.2019 | BTC 770502101 A