Skyworth SLTV-1963A Owner's Manual page 11

REMOTE CONTROL OPERATION
2
2
4 5
7 8
8 - /- - 0
6
TV/AV
CH.+
VOL.- MENU
14
CH.-
11
3
P.M. DTV
10
To quit this menu please press CC button again or
MENU button or it will disappear automatically after
10-second display.
6.TV/AV Button( TV/AV )
1
Press this button to select the desired input source
among TV, DTV,Video, S-Video, Componentand
3
PC. You can press this button to switch among all
available inputs in this menu continuously until desired
input is displayed. Selected input will be switched to
6
7
automatically after two seconds.
9
7.Number (0-9) Button
Press these buttons to enter digits.
Q.
9
VIEW
These buttons for direct access to use a channel to enter
channel number for both ATV and DTV or enter
password for V-Chip.
5
CC
8.Digit Button (
13
For ATV, press this button to select one-digit, two-digit
VOL.+
12
and three-digit channel access.
For example, selecting channel 8, you can press 8 in "-" mode,
press 08 in"--" mode, press 008 in"---" mode.
10
It can switch channel digit according to user inputs
automatically. For example, current setting is three-digit
option. If two numbers are entered and switch to this
4
I/II
channel, two-digit option is set automatically.
15
If an invalid channel number is entered, it will keep
displaying current channel.
For DTV, Pressing this button completes physical
number input for channel number and a dot will be
displayed.
9.Quick View Button (Q.VIEW )
Press this button to watch the previously viewed channel
for both ATV and DTV.
10.Sleep Timer Button (
Press this button to set sleep time.
You can adjust sleep time (in minutes) by pressing the
VOL+/- buttons in the order shown below:
0
)
)
10 20 30-----------------120