Page 2
SWITCH ON PRIVACY. Thank you very much for purchasing your eBlocker. Your privacy belongs to YOU again – not to the Internet. With this guide you can set up your eBlocker in no time.
Please mind the following safety notes before using your eBlocker: Package Contents page 6 Technical Specifications page 7 Your eBlocker does not have a power switch. To switch off or reboot your eBlocker please go to „Settings>System> Installation page 8 Shutdown“ or disconnect the power supply. Activation...
Package Contents Device Description eBlocker (for extensions) Power supply (100-240V) incl. country adapters LAN cable HDMI License card (not in use) Quick start guide Power jack Technical Specifications 1 x 10/100/1000 LAN RJ45 1 x HDMI (not in use) 1 x Power supply 5V (≥ 2A) Power consumption: <10W...
Installation Activation 1. Connection The Activation Wizard requires the serial number of your eBlocker, your Start by connecting your eBlocker license key and a valid email address. with the orange LAN cable to your router or switch. Then connect the enclosed power supply to power up your eBlocker.
Anon eBlocker Icon Device Cloaking eBlocker‘s activity is shown on each site by the eBlocker activity Pretend you are using a different device to increase icon. Clicking on the icon gives you access to the controlbar. your privacy even more.
Help User Manual & Support: http://eblocker.com/help Trademarks eBlocker and the eBlocker icon are registered trademarks of eBlocker GmbH. The use of our trademarks is prohibited to third parties. Regulatory Compliance Information for the regulatory compliance and certification is available at: http://eBlocker.com/regulatory...
Need help?
Do you have a question about the eBlocker and is the answer not in the manual?
Questions and answers