Advertisement
Color
Symbol
I/O
Red
VCC
IN
Black
GND
IN
Yellow
D1
OUT
Blue
D0
OUT
Green
CP
OUT
White
RX
IN
Orange
TX
OUT
Brown
Boot
IN
-
-
To configure the MP2 reader you must connect the MP2 to the PC by RS232C interface using our software.
Remark:
MF700KIT is a kit for MP2 to connect with PC. It is an optional accessory for purchasing.
MP2 Wires Assignment
Power Input: 12VDC
Power Ground + Singal Ground
Clock (ABA TK2) ; Data 1 (Wiegand)
Data (ABA TK2) ; Data 0 (Wiegand)
Card Present (ABA TK2)
RS232 RXD (To Host TXD)
RS232 TXD (To Host RXD)
Reboot (While this line wired with GND at power on,MP2 will enter boot phase.)
-
-
CAUTION:
The crossed out wheeled bin label that can be found on your product indicates that this
product should not be disposed of via the normal household waste stream.
To prevent possible harm to the environment or human health please separate this
product from other waste streams to en-sure that it can be recycled in an
environmentally sound manner.
For more details on available collection facilities please contact your local government
office or the retailer where you purchased this product.
This information only applies to customers in the European Union.
For other countries, please contact your local government to investigate the possibility
of recycling your product.
Description
12VDC
DOC# TM951322
Advertisement
