Table of Contents
Advertisement
Web Configuration
screen shown below, select the file name of the downloaded firmware, then
click "Apply Changes". The firmware upgrade will take a few minutes.
Note: Do not interrupt the process by removing power from the Print
Server or you could cause permanent damage to the device.
Web Interface – System Settings (Changing Password)
The Print Server ships with NO preset password. If you wish to set
a password for greater security, be sure to choose a password that
you will remember, and make a note of it. This utility will require you
to enter the new password twice. If you are entering a password for
the first time, leave the "current" password field blank. Press "Apply
Changes" when done.
The Web page auto-refresh interval setting can be changed in this
menu. If you want a slower or faster interval, choose a number in the
range and press "Apply Changes".
19
19
1
2
3
4
5
6
7
8
9
10
Advertisement
Table of Contents
