Summary of Contents for Netview Technologies NetVue NI-1200
- Page 1 Hassle Free IP Camera User’s Manual Version: 1.0.0 NetView reserves the right to make any changes and amendment to this manual. The content may be renewed as our service develops or changes. Please visit www.netviewtech.com for more information.
- Page 2 I. Hardware Installation Firstly, connect the network cable with the network interface on the backside of the camera and the route or Modern, so as to access network. 1. Connect the attached power adapter with the DC input port on the backside of the camera and the wall socket power or an electrical outlet (Before connecting power, please check whether the power adapter and the electrical outlet are in good condition, for the sake of your personal safety and avoiding unnecessary loss.) The...
- Page 3 II. Begin to use 1. Login www.mynetvue.com Enter in the address bar with a browser, and come to the user register interface. If you are a new user, please open an account first. 2. Register On the login interface, click “Register” and enter user register interface. Complete your register by following the prompt.
- Page 4 the camera), then give the camera your favorite name. Click Add button finish this procedure. If you currently don’t want to add the camera, select Cancel and it return back the page. III. Plugin installation Verify the installation of a small plugin: First, playing video from this camera on Web requires a small plugin java.
- Page 5 The page you are browsing uses Java. Microsoft webpage provides more information on Java. Do not show this message again. More information Based on the above sample prompt for java plugin on IE browser, here explain the installation process(Prompt for process on different browsers varies). Click “More information(M)”, and then on the new page follow prompt to install java.
- Page 6 5. Click “Install”. ( Please note that, user can change default installation place C:\Program Files\Java into other places if user selects the check box Change Destination File and follows instructions.) 6. When a finish window appears, please click “Close”. There is no need to fulfill additional settings to Java, and no need to restart the computer.
- Page 7 IV. Live viewing After finishing the procedure of adding your camera, with the mouse drag (move the mouse on the camera icon or name and then press left mouse button for movement) your camera(Or a shared camera from other user) to designated area on the right side. And the video starts to play. ( Note: Only when the camera is online can it be dragged and played.
- Page 8 After selecting a wanted time slot, you can download the video data memorized on the TF card. The download prompt may be varied due to different browsers you use. In a popped up download window, select Save, and the video data will be saved in a file pointing...
-
Page 9: Wifi Configuration
to your appointed path after your confirmation. If you download the video data by a download tool like Thunder etc., you can find them in your assigned file, then with the mouse double click or right click the video clip to watch. 六、分享... - Page 10 WIFI configuration is on page of user control center. Select an online camera. Then select your wanted wifi in the list of discovered wireless signal, and enter its password. Click Connect button to access. If the below prompt appears, it means that the wifi is being configured. User can close this window after several seconds.
-
Page 11: Other Functions
VIII. Firmware update Firmware update is in the Setting page of User Control Center. Select an online camera, and click “Firmware” after obtaining firmware/wifi information. On the firmware page, information includes camera name, firmware type, firmware version, and release date. Click Update firmware to complete. There will be prompt to restart the camera. - Page 12 Cancel Sharing: In the list My camera, move your mouse to the camera name you have added, and click click Cancel Sharing button in the dropdown list. Then from the list of cancel camera, select the username you would like to cancel sharing. If there is no other shared user, the list will be blank.
- Page 13 other user, and click Rename in the dropdown list. Then in the dialog box enter a new name and click Rename . If you currently don’t want to change the name of the camera, please click Cancel and return. Change password Click the button in the top right corner to change password.
- Page 14 Please enter your username and email address (The email must be the one you have associated with this username), and then click Reset Password button. The new password of this username will be sent in a mail to your email address. If you suddenly remember the password before reset password, you can click Login button to login your account in the popped up login interface.
- Page 15 camera is online can you play the video. The camera is online when its icon is in green and offline in gray . There is no triangle button to play video when the camera is offline.) Add camera: On the live broadcast page of user control center, click Add camera: In the message box for adding camera, enter the camera’s ID in the bar Camera ID (This ID No.
- Page 16 click Cancel button to stop. Remove camera: In the list My camera/Shared Camera, select a camera which you would like to remove. Click the left camera icon( ), then click Remove button in the dropdown list. Then the camera is removed.
- Page 17 Cancel sharing: In the list My camera, select a camera which you would like to stop sharing with the other users. Click left camera icon( then click Cancel Sharing button in the dropdown list. In the popped up window, select the user name with whom you want to stop sharing.
- Page 18 2、Android For Android mobile phone user, you need to download by your phone our application software name NetviewA.apk for the Android platform (Apps to download at: www.netviewtech.com). Software setup: Firstly, find software have downloaded on your phone. Now click and begin to setup: Click Install button as beginning.
- Page 19 install, click Cancel button to return back. Install interface will appear if you decide to install. If you want to experience the software to watch video, click Open button after finishing the installation. If you currently don’t want to use the software, click Finish button to end the procedure.
- Page 20 Account management center: Enter the account management center after your login. There are functions here such as Watch Camera, Add Camera, Share Camera, and Remove Camera. Watch Camera: On the page Account Management Center, click Watch Camera . It appears your camera list (including the shared camera you got from the other users). Select an online camera and you can now watch real-time video.
- Page 21 (The size of window to play video is related to the screen resolution of your cell phone) Add camera: page Account Management Center, click camera: In the popped window, enter the camera’s ID in the bar Camera ID (This ID No. is a unique identity of the camera which is attached in the label or package of the camera), then give the camera your favorite name.
- Page 22 Share Camera: On the page of Account Management Center, click Share camera: . Then select from the camera list a camera which you would like to share with the other users. In the popped window, enter the shared username. Click button to carry out sharing.
- Page 23 Revoke Camera: page Account Management Center, click Revoke camera to enter a list which shows the shared users. Then select from the list the users with whom you would like to stop sharing. Remove Camera: page Account Management Center, click Remove camera to enter a list which shows your own cameras and the...
- Page 24 cameras shared to you by the other users. Then select from the list the cameras you don’t want to keep. Logout: On the page of Account Management Center, click Logout to exit. It will come back to the login interface.
- Page 25 XI. Trouble shooting 1. Is it easy or not to install and setup a Hassle Free IP Camera? Answer: It’s extremely easy to install and setup a Hassle Free IP Camera. You can begin using it by just connecting its power and network cable. 2.
- Page 26 Answer: This function is under development, and will be available in subsequent versions. 16. Is there PTZ function? Answer: This function is under development, and will be available in subsequent versions. 17. Can its video be shared to a social network site and embedded to a third webpage? Answer: This function is under development, and will be available in subsequent versions.