Belkin F1UP0002 User Manual page 16

Installation Procedure
10.
To set up the IP address of the Print Server, the default
1
is set to "DHCP" for the TCP/IP configuration.
2
3
4
5
6
7
8
The Print Server by default will try to get an IP
9
address from the connected Belkin Router running
the Dynamic Host Configuration Protocol (DHCP)
server and the following screen will appear.
10
11
12
13
The newly assigned TCP/IP settings will be displayed in the
"TCP/IP Configuration" window for your reference. Click
"Next" to continue on to step 3 in the installation process.
14
15
16
17
16