Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Diapro T?bbi Ürünler Across System
Summary of Contents for Diapro T?bbi Ürünler Across System
- Page 2 Incubator Version 1.0...
- Page 3 Foreword Thank you for purchasing our Products: Card Incubator , This Manual for users contains function and operation of the Instrument. In order to use the instrument properly, please read this manual carefully before using the Instrument. Opening Check Please check the Instrument and Appendix with the packing list when you first open the instrument packing case.
-
Page 4: Table Of Contents
Contents 1. Introduction………………………………………………..1 1.1 Delivery package…………………………….…………….1 1.2 Structure Description…………………………………..2 1.3 Installing the device………………………………….…..3 2. Technical data……………………………………………….4 3. Safety precautions……………..………………………..5 4. Operation guide..…………………………………………….6 4.1 Control elements……….…………………………………..6 4.2 Setting the timing time……..…………………………...6 4.3 Setting the temperature…………………………..……..6 4.4 Switching to the Fahrenheit display……………………..7 4.5 Start and Stop……………………………………………..7 4.6 Temperature calibration…………………………………..8 5.Maintenance and cleaning…………………………………10... -
Page 5: Introduction
1 Introduction This Incubator designed for workstations in training and research laboratories in the fields of bioscience, medicine and chemistry. Before starting up this incubator for the first time, please read the rest of this operations manual. 1.1 Delivery package Card Incubator 1pcs Power line... -
Page 6: Structure Description
1.2 Structure Description Right Block Left Block Right Display Panel Left Display Power Switch Power connector... -
Page 7: Installing The Device
1.3 Installing the device 1.3.1 Place the card incubator onto a level , horizontal surface. 1.3.2 Insert the column connector of the power line to power connector of the device ,and insert another connector of the adapter to mains power supply. -
Page 8: Technical Data
2 Technical data Model K37-24 Power supply AC220V 22V 50Hz Fuse 250V 3A 5X20 Power supply AC220V 22V 50Hz Maximum Power 200 W Temperature range Timing range 1sec 99min59sec Accuracy of the temperature Display accuracy Heating time 5min (from 20 to 37 Ambient temperature Dimensions W D H... -
Page 9: Safety Precautions
3 Safety precautions This product is a normal and an indoor Instrument. Read the Manual carefully before operation, The expert of wiring equipment can operate this Instrument. The operator should not open or repair the Instrument by himself, which will result in losing the qualification of repair guarantee or occur accident. -
Page 10: Operation Guide
4. Operation guide 4.1 Control elements Temperature Temperature of right block of left block Time of right Time of left block block Start/stop Start/stop the the left timer right timer Setting time Setting time of right block of left block 4.2 Setting the timing time press “... -
Page 11: Switching To The Fahrenheit Display
4.4 Switching to the Fahrenheit display Press “ ” and “ ” key simultaneously the display switches from Centigrade to Fahrenheit. Also press “ ” and “ ” key simultaneously again, the display switches from Fahrenheit to Centigrade. 4.5 Start and Stop The instrument start to heat automatically according to the previous set temperature as soon as power on. -
Page 12: Temperature Calibration
4.6 Temperature calibration The temperature of the instrument has been calibrated before it is sold out. But if there is deviation between the actual temperature and the displayed temperature due to some reasons, you can do as follows to correct the error. The temperature veracity will be within after the temperature adjustment. - Page 13 4.6.2 Press left “START/STOP ” key and right “START/STOP” simultaneously, the display come in the calibration interface. The practical temperature shows 37.0, if the block do not reach 37.0 C, it will rise to 37.0 at once. When the practical temperature reach 37.0, the units digit will flicker ceaselessly.
-
Page 14: Maintenance And Cleaning
5 Maintenance and cleaning The well in the block should be cleaned by the cloth stained with alcohol to assure good heat translation between the block and the test tube and no pollution. If there are smutches on the Instrument, clean them with cloth. Power off when cleaning the Instrument. -
Page 15: Annex 1 Wiring Diagram For Incubator
Annex 1 Wiring Diagram for Incubator AC220V... -
Page 16: Packing List
Packing List Item Type Incubator K37-24 Power line 250V 6A Operation manual...
Need help?
Do you have a question about the Across System and is the answer not in the manual?
Questions and answers