Page 1
FILO IN2UIT Stylish Mobility:Bluetooth Acoustic Device...
Page 2
WARNING IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire or electrical shock, do not expose this 1. Read these instructions carefully. equipment to dripping or splashing and ensure that no objects with 2. Heed all warnings. liquids, such as vases, are placed near the device. 3.
Page 3
(1) This device may not cause harmful Interference, and (2) This device must FEDERAL COMMUNICATIONS COMMISSION accept any interference received, including interference that may cause undesired operation. (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a FCC Caution: Any changes or modifications not expressly approved by the Class B digital device, Pursuant to Part 15 the FCC rules.
By conforming to our tips and suggestions, you will achieve the maximum performance from the device. We wish you many years of enjoyment through Filo, our ultra-high performance Bluetooth mobile speaker.
PLACING THE SPEAKER Placing on your desktop 1. For desktop usage, flip out the stand to its fully extended position until you feel it engage and ‘click’ at the hinge. Place the speaker on a firm, level surface. Do not lay the speaker on its back during playback. 2.
It is a free hanging design, so you can attach/detach contact a qualified professional. Do not hang items from the brackets or Filo at your convenience for either wall or desk mounted listening speakers. The brackets were specifically designed to support the weight of positions.
Once you pair a Action Pairing (after power is device with the Filo speaker, you should not have to pair it again. NOTICE: You may have to enter the password “0000” in order to connect on ) Pressing Bluetooth device.
3.5mm jack input on the Filo system. A placed on any flat surface. Filo can operate for up to 10 hours on a full 3.5mm stereo cable, with plugs on both ends is required (not included in the battery charge.
System status indicator table Beep indication table LED Indication table Table 1 status indication Status Power Power Tones Connected Disconnected Low battery Status High LEDs BT Connected Pairing Not paired Blue Flash(0.5s) Flash(0.5s) Table 2 charging indication “Du” twice every Low to High to High (once)
1. ELECTROSTATZ™ tweeters are dipole transducers. This means • Turn the Filo speaker off and back on. • Remove the Filo speaker from the pairing list on your the sound waves are transmitted from both sides of the diaphragm in Paired Bluetooth Bluetooth device pairing list (consult the device owner’s...
• Make sure your Bluetooth device is playing audio, and the volume is up. audio from Components of the highest quality are used in Filo. This assures years of • Your Bluetooth device may be out of range – try moving Bluetooth device it closer to the Filo speaker.
CONTACTING CUSTOMER SERVICE WARRANTY For questions concerning the Filo wireless, mobile speaker, contact your The warranty only covers faults or defects in material and production. local IN2UIT dealer. To contact IN2UIT directly, consult the contact Damage caused as a result of abuse, misuse or tampering is not covered by the warranty.
TECHNICAL SPECIFICATIONS System Two-way active speaker Bluetooth speaker with apt-X 150Hz – 30kHz Frequency Response (+/- 3 dB) Sensitivity (1m/1W on axis) 80dB Power consumption Idle: 1.8W / Max: 2W Amplifier power Tweeter: 2+2W / Woofer: 2W Bass Principle Closed Crossover Frequency 1.6kHz Crossover Slope...
Page 16
FILO Stylish Mobility:Bluetooth Acoustic Device IN2UIT Inc.