Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Mofi StudioTracker
- Page 2 IN THE BOX StudioTracker Cartridge with Stylus Guard Stylus Cleaning Brush Hex Driver 2.5mm x 20mm Hex Screw (2) 2.5mm x 18mm Hex Screw (2) 2.5mm Nut (2) 2.5mm Nylon Washer (2)
- Page 3 SETUP White Keep stylus guard in place during installation Green to prevent damage to the needle Black Connect the four headshell leads, making sure the color-coated leads match the corresponding color- coded pins. Carefully mount cartridge Screws to the headshell. Let nut rest against cartridge body to allow thread to catch.
- Page 4 Carefully remove stylus guard, balanced the arm, and set an approximate tracking force of 2g. Using the Mobile Fidelity GEO-Disc or other alignment tool, set overhang/zenith by adjusting cartridge so the stylus tip sits right on the bullseye while the cantilever is parallel with Center the line that intersects...
- Page 5 USAGE AND CARE Always use tonearm’s lift mechanism for cueing Clean your records before each play to avoid unnecessary wear Back to Front After each play, gently clean your stylus, always brushing back-to-front. We recommended Mobile Fidelity LP#9 Stylus Cleaner.
- Page 6 StudioTracker UltraTracker MasterTracker Type Dual Magnet Dual Magnet Dual Magnet (MM) Stereo (MM) Stereo (MM) Stereo Weight 6.4g 9.7g 9.7g Tracking 1.8 – 2.2g 1.8 – 2.2g 1.8 – 2.2g Force Impedance 47kOhm 47kOhm 47kOhm Capacitance 100pF 100pF 100pF Frequency...
- Page 7 MoFi Electronics – 1811 W Bryn Mawr Ave Chicago IL...
Need help?
Do you have a question about the StudioTracker and is the answer not in the manual?
Questions and answers