Page 1
INVIS-O-TRAK MODEL # 3000-INH # 3000-INV The Authority in Custom Motorized Lifts INSTALLATION MANUAL WWW.AUTON.COM 29102 Hancock Pkwy | Valencia, California 91355 Phone: 661-257-9282 | Fax: 661-295-5638 E-mail: tvlifts@auton.com...
Page 2
In the event that you require assistance, do not hesitate to contact one of our technicians. We will be happy to answer your questions and resolve Phone Support: 661-257-9282, ext. 104 • Email Support: tech@auton.com any problems you encounter during the installation process.
Page 3
caution: Dropping or jarring unit by hitting walls, ceilings, or other objects may cause misalignment of lift. Step 4: Adjust Motor & Limit Switches choose which motor you have either a ________ or a __________. Limit switches are preset at the factory for optimal positioning and performance, but they may be changed. bottom Two adjusting screws for the limit are located at the end of the motor.
Page 4
caution: Dropping or jarring unit by hitting walls, ceilings, or other objects may cause misalignment of lift. Continued Adjust Motor and Limit Switch Continued Limit switches are preset at the factory for optimal positioning and performance, but they may be changed. bottom Two adjusting screws for the limit are located at the end of the motor.
Page 5
caution: Dropping or jarring unit by hitting walls, ceilings, or other objects may cause misalignment of lift. Continued Adjust Motor and Limit Switch Continued Limit switches are preset at the factory for optimal positioning and performance, but they may be changed. Two adjusting screws for the limit are located at the end of the motor.
Page 6
Step 5: Operation Instructions Multi-Function Controller Stop The multi-function controller operates with RF (Radio Frequency), IR (Infrared) simultaneously and has3 buttons: Stop - Press and release for stop motion Down* Down/Right – Press and release for down (or Right) motion* Up/Left –...
Need help?
Do you have a question about the 3000-INH and is the answer not in the manual?
Questions and answers