Related Manuals for Sherwood TL-1705W
Summary of Contents for Sherwood TL-1705W
- Page 1 O P E R AT I N G I N S T R U C T I O N S 17.1 inch WIDESCREEN TFT - LCD TV TL - 1705W...
-
Page 2: Read This Before Operating Your Unit
Introduction READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should connection to grounding electrodes, and requirements for the be read before the product is operated. grounding electrode. See Figure 1. 2. Retain instructions - The safety and operating instructions should Figure 1 be retained for future reference. -
Page 4: Table Of Contents
CONTENTS Introduction READ THIS BEFORE OPERATING YOUR UNIT | 2 SAFETY INSTRUCTIONS | 3 Controls FRONT OF THE TV | 5 REAR OF THE TV | 6 REMOTE CONTROL | 7 Installations CONNECTING VHF AND UHF ANTENNAS | 8 CONNECTING CABLE TV | 9 CONNECTING VCR | 11 CONNECTING A S-VHS VCR | 13 CONNECTING DVD PLAYER | 13... -
Page 5: Controls
Controls FRONT OF THE TV The buttons on the front panel control our TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. VOL. MENU SOURCE STANDBY/ON CHANNEL UP/DOWN ( / ) STANDBY/ON Press to change channels. -
Page 6: Rear Of The Tv
REAR OF THE TV For more information on connecting equipment, see "Installations" on page 8 and "USING YOUR TV AS A COMPUTER(PC) DISPLAY" on page 60. POWER (DC) INPUT AUDIO INPUT Connect to the audio jack of a VCR or camcorder, etc. -
Page 7: Remote Control
REMOTE CONTROL All the functions can be controlled with this remote control unit. Some functions can also be adjusted with the buttons on the front panel of the set. POWER ON STANDBY Turns the TV on. Turns the TV off. AUTOSET PC AUTO Press to memorize the receptable... -
Page 8: Installations
Installations CONNECTING VHF AND UHF ANTENNAS Please be certain that TV is unplugged from the AC outlet before making any connections. Since different component often have different terminal names, carefully read the operating instructions of the component connected. If your antenna has a set of leads that look like this, see Antennas with 300-ohm Flat Twin Leads below. -
Page 9: Connecting Cable Tv
Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). Connect both antenna leads to the combiner. - Page 10 Connect the other end of this cable to the TV antenna terminal on the rear panel. ANTENNA Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF(A/B) switch, and four lengths of coaxial cable.
-
Page 11: Connecting Vcr
Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B-IN terminal on the A/B switch. CABLE Incoming Cable Splitter RF (A/B) Switch Cable Box Connect another cable between the other OUT terminal on the splitter and the A-IN terminal on the RF(A/B) switch. - Page 12 Connect the cable or antenna to the ANTENNA IN terminal on the rear of the VCR Rear Panel VCR. AUDIO VIDEO ANTENNA Incoming Cable or Antenna Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.
-
Page 13: Connecting A S-Vhs Vcr
CONNECTING A S-VHS VCR Your TV can be connected to an s-video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.) To begin, follow steps 1-3 in the previous section to connect the antenna or cable to your VCR and your TV. -
Page 14: Connecting Dtv(Set-Top Box)
CONNECTING DTV(SET-TOP BOX) The connections for a typical set-top box are shown below. Connect a set of audio cable between the AUDIO L/R jacks on the TV and the AUDIO OUT jacks on the set-top box. Connect a video cable between the COMPONENT(C , Y) jacks on the TV and the P , Y jacks on the set-top box. -
Page 15: Installing Batteries In The Remote Control
INSTALLING BATTERIES IN THE REMOTE CONTROL Pull the battery cover upward in the directions shown by the arrow and remove it. Insert two batteries (AAA size). Make sure to match the “+” and “-” ends of the batteries with the diagram inside the compartment. Replace the battery cover. -
Page 16: Operations
MENU MUTE Operations ENTER TURNING THE POWER ON/OFF To turn the power on, press the POWER SOURCE POWER ON POWER ON STANDBY ANDBY ON button on the remote control. CHILD ADD/ PC AUTO PC AUTO SLEEP SLEEP PRE.CH PRE.CH AUTOSET AUTOSET LOCK ERASE... -
Page 17: Setting The Osd Timeout
PC AUTO SLEEP PRE.CH DISPLAY Use the button to select one of the MENU MUTE icons. Then press button to access the icon’s sub-menu. ENTER ENTER POWER ON STANDBY You can also use the MENU, CHANNEL and VOLUME PC AUTO SLEEP PRE.CH DISPLAY... -
Page 18: Selecting A Menu Language
SELECTING A MENU LANGUAGE POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY For explanation purposes, this instuctions explains the menu language displayed on the screen in English. Press the MENU button to display the menu. POWER ON STANDBY MENU MENU MUTE MUTE PC AUTO... -
Page 19: Selecting Input Source
SELECTING INPUT SOURCE POWER ON STANDBY You must select the appropriate mode in order to view each source on the TV. PC AUTO SLEEP PRE.CH DISPLAY Sources can be selected with automatic or manual method. Auto Selection Auto-searching can be used with this method. You can set this method in on-screen menus. Press the MENU button to display the menu MENU MENU... -
Page 20: Menu 4 5 6
PC AUTO SLEEP PRE.CH DISPLAY Manual Selection Press the MENU button to display the menu MENU MENU MUTE MUTE and select [options] - [source select] menu using buttons. POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY ENTER ENTER SOURCE Press button to select the “manual”. - Page 21 POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY Selecting A Broadcast Source When you select the TV mode as input source, you should select the broadcast source. Press the MENU button to display the menu MENU MENU MUTE MUTE and select [tv] - [source] menu using buttons.
-
Page 22: Adjusting The Volume
POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY ADJUSTING THE VOLUME Press the VOL + or VOL - button to increase or MENU MUTE decrease the volume. ENTER ENTER POWER ON STANDBY SOURCE CHILD ADD/ LOCK ERASE CAPTION STILL PC AUTO SLEEP PRE.CH DISPLAY... -
Page 23: Listening With Headphones
POWER ON STANDBY PC AUTO SLEEP PRE.CH AUTOSET Using Mute Press the MUTE button Then the sound is cut off and is displayed at lower-right corner of the MENU MENU MUTE MUTE screen. POWER ON STANDBY PC AUTO SLEEP PRE.CH AUTOSET ENTER ENTER To turn mute off, press the MUTE button... -
Page 24: Memorizing The Channels
MEMORIZING THE CHANNELS POWER ON STANDBY Once you have memorized the available channels, you can use the CH +/- buttons to scan the memorized channels. Channels can be tuned with automatic or manual method. PC AUTO SLEEP PRE.CH DISPLAY Before memorizing channels, first select the broadcast source.(Refer to “Selecting A Broadcast Source” on page 21 ) Stroing Channels In Memory (Automatic Method) All of the receivable channels can be stored by this method. - Page 25 PC AUTO SLEEP PRE.CH DISPLAY Adding And Erasing Channels (Manual Method) Press the MENU button to display the menu MENU MUTE and select [tv]-[channel] menu using POWER ON STANDBY buttons. PC AUTO SLEEP PRE.CH DISPLAY ENTER MENU MUTE Press button to select a channel to SOURCE be added or erased.
-
Page 26: Window Pip Sw Swap Ap Src
PC AUTO SLEEP PRE.CH DISPLAY POWER ON STANDBY PC AUTO SLEEP PRE.CH AUTOSET Quick way Select the channel you want to add or erase MENU MUTE by pressing CH +/- buttons. MENU MUTE You can view any channel (including an removed ENTER ENTER channel) by using the number buttons on the remote... -
Page 27: Changing Channels
POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY CHANGING CHANNELS Using On-Screen Menu Press the MENU button to display the MENU MENU MUTE MUTE menu and select [tv] - [channel] menu using buttons. POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY ENTER ENTER... - Page 28 Directly Accessing Channels Use the number buttons to quickly tune to any channel, even that was erased or not memorized. POWER ON STANDBY Press the number buttons to go directly to a channel. PC AUTO PC AUTO SLEEP SLEEP PRE.CH PRE.CH AUTOSET AUTOSET For example, to select channel 71, press “7”, then...
-
Page 29: Customizing The Picture
CUSTOMIZING THE PICTURE POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY You can use the on-screen menus to adjust the brightness, contrast, filter, sharpness, color and tint according to personal preference (each items(sub-menus) can be varied according to the input source.). Alternatively, you can use one of the “automatic”... -
Page 30: Using Automatic Picture Settings
POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY USING AUTOMATIC PICTURE SETTINGS Your TV has four automatic picture settings ("normal”, "movie", "sports" and "bright" ) that are preset at the factory. You can activate each picture setting by pressing the P.MODE button. MENU Press the P.MODE button to select one of the + 100... -
Page 31: Viewing The Current Status
MENU MUTE Press to adjust the position. ENTER POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY SOURCE Press MENU button repeatedly to exit. CHILD ADD/ LOCK ERASE CAPTION STILL MUTE SWAP MENU MUTE POWER ON STANDBY ENTER PC AUTO SLEEP PRE.CH AUTOSET REMOTE CONTROL RM - 501 VIEWING THE CURRENT STATUS... -
Page 32: Customizing The Sound
CUSTOMIZING THE SOUND POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY The [treble], [bass] and [balance] can be adjusted to suit your personal preference. These can be selected when the [surround mode] menu is set to “user”. Refer to next page. Press the MENU button to display the menu and select [audio] menu using MENU... -
Page 33: Selecting A Surround Sound
POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY SELECTING A SURROUND SOUND Your TV has five automatic sound settings (“standard”, “music”, “movie”, “sports”, “news”, and “user”) that are preset at the factory. You can activate any of them by making a selection from the on-screen menu). Press the MENU button to display the menu MENU MENU... -
Page 34: Special Features
POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY Special Features SELECTING THE BACKGROUND OF MENU Press the MENU button to display the menu MENU MENU MUTE MUTE and select [options] - [menu background] POWER ON STANDBY menu using buttons. PC AUTO SLEEP PRE.CH DISPLAY... -
Page 35: Labeling The Channel Name
Press ENTER or button. MENU MUTE POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY ENTER ENTER SOURCE MENU MUTE Press button to adjust the fine CHILD ADD/ LOCK ERASE CAPTION STILL tuning. MUTE SWAP ENTER ENTER POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY... -
Page 36: Freezing The Picture
MENU MUTE Press button to select characters : POWER ON STANDBY A~Z, a~z, 0 ~ 9, !, “, #, $, %, &, ‘, (, ), *, +, ,, -, ., /, :, ;, <, =, >, ?, @, [, \, ], ^, _, PC AUTO SLEEP PRE.CH... -
Page 37: Digital Pan And Zoom
POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY POWER ON STANDBY PC AUTO SLEEP PRE.CH AUTOSET Press the MENU button repeatedly to exit. MENU MENU MUTE MUTE MENU MUTE ENTER ENTER Quick way SOURCE Press the STILL button at a particular scene. CHILD ADD/ LOCK... - Page 38 Each time button is pressed, the MENU MUTE picture is magnified as follows: 1.06 1.19 1.38 1.69 2.06 2.50 3.63 4.38 5.13 6.00 6.94 8.00 ENTER ENTER 9.13 10.31 11.56 12.94 14.44 15.94 POWER ON STANDBY To pan the picture, perform the step 5 in PC AUTO SLEEP PRE.CH...
-
Page 39: Choosing A Multi-Channel Sound (Mts) Soundtrack
MENU MUTE Press ENTER button to change to pan mode and then press / / / button to move to the part of scene. Each time ENTER button is pressed, zoom mode ENTER ENTER or pan mode is selected. Press the MENU button repeatedly to exit. POWER ON STANDBY SOURCE... -
Page 40: Setting The Clock
POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY SETTING THE CLOCK Setting the clock is neccessary in order to use the timer features of the TV. Also, you can check the time while watching the TV. (Just press ENTER button.) Press the MENU button to display the menu MENU MENU... -
Page 41: Setting The On/Off Timer
POWER ON STANDBY SETTING THE ON/OFF TIMER PC AUTO SLEEP PRE.CH DISPLAY Make sure the clock has been set correctly before setting the timer. Setting the On Timer Press the MENU button to display the menu MENU MENU MUTE MUTE and select [time] - [on time] menu using buttons. - Page 42 Press ENTER or button. MENU MENU MUTE MUTE Then press to select [channel] menu. POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY ENTER ENTER SOURCE Press button repeatedly or hold POWER ON MENU MENU MUTE MUTE STANDBY down either of these buttons until CHILD ADD/ LOCK...
-
Page 43: 2 Source
MENU MUTE Press button. Then press button repeatedly or hold down either of these buttons until the POWER ON STANDBY correct hour appears.(i.e., the hour when the TV will turn off.) PC AUTO SLEEP PRE.CH DISPLAY ENTER ENTER SOURCE After the hour is set, press button. -
Page 44: Setting The Sleep Timer
POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY SETTING THE SLEEP TIMER The sleep timer automatically shuts off the TV after a preset time (from 10 to 240 minutes). Press the MENU button to display the menu MENU MENU MUTE MUTE and select [time] - [sleep timer] menu using POWER ON... -
Page 45: Adjusting Closed Caption Settings
ADJUSTING CLOSED CAPTION SETTINGS This TV is equipped with an internal closed caption decoder. Closed caption is a system which allows conversations, narration, and sound effects in TV programs and home videos to be viewed as captions on the TV screen (see the illustration). - Page 46 PC AUTO SLEEP PRE.CH DISPLAY Selecting the background of Closed Caption Press the MENU button to display the menu POWER ON MENU MENU MUTE MUTE STANDBY and select [settings] - [close capt. background] menu using PC AUTO SLEEP PRE.CH DISPLAY buttons.
-
Page 47: Viewing Closed Captions
PC AUTO SLEEP PRE.CH DISPLAY VIEWING CLOSED CAPTIONS Press the MENU button to display the menu POWER ON STANDBY MENU MENU MUTE MUTE and select [settings] - [close caption] menu using buttons. PC AUTO SLEEP PRE.CH DISPLAY ENTER ENTER MENU MUTE SOURCE Pressing... -
Page 48: Changing Window Layout
MENU MUTE CHANGING WINDOW LAYOUT ENTER Press the PIP button. Each time this button is pressed, the picture layout changes as follows: SOURCE SOURCE POP3 full screen POWER ON STANDBY CHILD CHILD ADD/ ADD/ LOCK LOCK ERASE ERASE CAPTION CAPTION STILL STILL PC AUTO... -
Page 49: Source
POWER ON STANDBY ENTER PC AUTO SLEEP PRE.CH AUTOSET Selecting a signal source for PIP Press the SRC button to select the source of sub picture. SOURCE TV/S-VIDEO/AV/DVD can be selected for signal CHILD ADD/ LOCK ERASE CAPTION STILL source of sub picture. MENU MUTE WINDOW... - Page 50 PC AUTO SLEEP PRE.CH DISPLAY Changing position of Sub window Press the MENU button in PIP mode to POWER ON STANDBY MENU MENU MUTE MUTE display the menu and select [window] - [pip position] using buttons. PC AUTO SLEEP PRE.CH DISPLAY ENTER ENTER...
- Page 51 POWER ON STANDBY PC AUTO SLEEP PRE.CH AUTOSET ENTER Selecting the one of two windows Press the WINDOW SEL. button. Each time this button is pressed, the window #1 or #2 is selected. SOURCE SOURCE CHILD CHILD ADD/ ADD/ LOCK LOCK ERASE ERASE...
- Page 52 MENU MUTE Picture Off Picture (POP3) POWER ON STANDBY ENTER Activating POP3 PC AUTO SLEEP PRE.CH AUTOSET Press the PIP button repeatedly until the windows are displayed as follows: SOURCE SOURCE CHILD CHILD ADD/ ADD/ LOCK LOCK ERASE ERASE CAPTION CAPTION STILL STILL...
-
Page 53: Blocking The Contents
BLOCKING THE CONTENTS The Parental Control function (V-Chip) is used to block TV programs viewing based on the ratings sent by the broadcast station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. Restriction of TV programs include two ratings that contain information about the program: the MPAA rating and the TV Parental Guidelines. -
Page 54: Child Add
Press ENTER or button. MENU MUTE POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY ENTER ENTER SOURCE Press button to select [enter]. MENU MUTE CHILD ADD/ LOCK ERASE CAPTION STILL Then press button to enter the password entry mode. POWER ON STANDBY MUTE SWAP... - Page 55 POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY Changing The Password Before changing the passwond, you should enter the old password first, performing the steps 1~ 5 in "Entering A Password" on the previous page. Press button to select [change]. MENU MUTE Then press...
- Page 56 POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY Setting The Restrictions Using MPAA Ratings Before setting this restrictions, you should enter the password first, performing the steps 1~ 6 in "Entering A Password" on page 53. MENU MUTE Press button to select [movie blocking].
- Page 57 POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY Setting The Restrictions Using TV Parental Guidelines Before setting this restrictions, you should enter the password first, performing the steps 1~ 6 in "Entering A Password" on page 53. MENU MUTE Press button to select [tv blocking].
-
Page 58: Child Lock
POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY CHILD LOCK If you do not want your child(ren) to watch the TV when you’re out, we recommend this function. Press the MENU button to display the menu MENU MENU MUTE MUTE and select [options] - [child lock] menu using buttons. -
Page 59: Factory Reset
POWER ON STANDBY PC AUTO SLEEP PRE.CH DISPLAY FACTORY RESET You can reset all the settings made in the menus to the default settings. Press the MENU button to display the menu MENU MENU MUTE MUTE and select [options] - [factory reset] using buttons. -
Page 60: Pc Display
PC Display USING YOUR TV AS A COMPUTER (PC) DISPLAY How to Connect Your PC to the TV REAR PANEL of TV PC VIDEO OUT PC video connection VIDEO AUDIO(ST) S-VIDEO PC IN POWER ON STANDBY REAR PANEL of TV PC AUTO SLEEP PRE.CH AUTOSET... -
Page 61: Mute Pip Swap Src
How to Set up Your PC Display Your PC display must be set as supportable format of this unit. The displayable monitor specification is shown below: Mode Resolution Vertical Horizontal Frequency(Hz) Frequency (KHz) 640 X 480 31.4 640 X 480 640 X 480 37.5 If possible, use 1280 X 768 @ 60Hz... -
Page 62: Remote Control Rm
Press to adjust the selected MENU MUTE item. POWER ON STANDBY ENTER PC AUTO SLEEP PRE.CH DISPLAY SOURCE Press MENU button repeatedly to exit. CHILD ADD/ LOCK ERASE CAPTION STILL POWER ON STANDBY MENU MUTE MUTE SWAP PC AUTO SLEEP PRE.CH DISPLAY ENTER... -
Page 63: Troubleshooting
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest service center. Problem Possible Solution Poor picture Try another channel. Adjust the antenna. Check all wire connections. -
Page 64: Appendix
Appendix RETRACTABLE STAND The maximum tilt angle is 15 degrees in the backward direction. Please do not tilt the TV outside the specified range. Using excessive force to tilt the TV may cause permanent damage to the mechanical part of the stand. Do not use the stand other than the one attached. -
Page 65: Using Your Tv In Another Country
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. The LCD panel is a very high technology product with thin film transistors, giving you fine picture details. -
Page 66: Specifications
Specifications Panel Display Size 17.1inch(434.38 mm, diagonal) Actual Display Sizel 372.48(H) X 223.488(V) mm Pixel Size 0.291 X 0.291 mm viewing Angle 88 / 88 / 88 / 88 (L / R / U / D) Frequency Horizontal 30 ~ 64 KHz Vertical 50 ~ 85 Hz Display Color...
Need help?
Do you have a question about the TL-1705W and is the answer not in the manual?
Questions and answers