My Fireplace Blower BK3 Instructions

MY
FireplaceBlower
High Quality Aftermarket Fireplace Blowers & Fans
TURN OFF THE GAS AND ELECTRICAL POWER BEFORE INSTALLING BLOWER!
When installed, make sure to contain any excess wire of the cord set;
Preventing it from making contact with moving or hot objects.
Drywall dust or other fragments may be present in your fireplace's vent space, clean this area before you install the
blower kit. Any bearing or motor damage resulting from this condition is not covered by the warranty policy.
This Blower Kit is tested and safe when installed in accordance with these installation instructions. It is your re-
sponsibility to read all instructions and consult the Owner's Installation Manual for your particular model number
for Supplemental Information before starting installation. Blower operates on 120V/60Hz power.

Blower Kit Parts

Check the contents of the carton.
Make sure nothing was damaged in shipment.
Do NOT install a damaged blower kit!
Description
Fan - 3 Motor System
Power Cord Harness
ON/OFF Rocker Switch
3-Prong to 2-Prong Adapter
Hardware
Installation Instructions
Step 1: Turn Off Fireplace and allow it to cool
down. Disconnect from 120V Power. Shut off
the Gas supply.
Remove Glass Doors. (If applicable: Figure: 1)
Step 2: Remove the front refractory access
panel by lifting up and angling out through the
fireplace opening. (Figure: 2)
Installer is responsible to check local codes
and read all instructions prior to installation.
Layout designed in U.S.A. © 2015
Instructions for Design Version - BK3 Fan Kit
RISK OF FIRE AND ELECTRICAL SHOCK!
Qty.
(Downloadable)
NOTE: Diagrams and Illustrations NOT to Scale
WARNING
1
1
1
GLASS DOOR REMOVAL
1
1
1
Figure: 1
Page 1 of 3
Installation Videos:
Installation Instructions:
MyFireplaceBlower.com:
1-800-466-4045
CL ICK
CL ICK
CL ICK
My Fireplace Blower
Burlington, Wisconsin
1-800-466-4045