Related Manuals for MS Electronics E925
Summary of Contents for MS Electronics E925
- Page 1 E925 E925/24V energy saving controls Product Guide Standard Humidistat today, tomorrow and in the future mselectronics.co.uk...
- Page 2 The E925 humidistat offers a calibration-free, high accuracy and high quality solution to humidity control in an electrical accessory plate form factor. The E925 regulates to a fully adjustable relative humidity setpoint between 5% and 95%, combined with an adjustable relative humidity hysteresis (differential) of anything between 1% and 10%.
- Page 3 1. IMPORTANT: ensure all electrical connections are isolated before commencing any work on the unit. 2. The E925 is designed to be mounted in a 20mm (or deeper) single-gang UK pattress box. 3. Connect the wiring to the terminal blocks on the humidistat as shown in Figure 1 (or any suitably appropriate form).
- Page 4 Product Warranty MS Electronics guarantees all their products against manufacturing defects for 5 years from the purchase date. If your product is found to be faulty, MS Electronics will, at their discretion, repair or replace the product free of charge.
Need help?
Do you have a question about the E925 and is the answer not in the manual?
Questions and answers