Safety Information; Before Installation - Pentair KREEPY KRAULY Kruiser PRO Installation Manual

Declaration of Conformity
We declare, under our sole responsibility, that the product identified in this declaration, and to which
this declaration relates, are in conformity with the protection requirements of Council Directive
2006/42/EEG The Manufacturer, Pentair Water Belgium BVBA, has the right to modify the products without previous
notice.
© 2012 Pentair. All rights reserved. This document is subject to change without notice
Trademarks and disclaimers. Pentair®, Kreepy Krauly® & Kreepy Kruiser PRO
mark of Pentair and/or its affiliated companies. Unless noted, names and brands of others that may be used in this
document are not used to indicate an affilitation or endorsement between the proprietors of these names and brands
and Pentair. Those names and brands may be the trademarks of those parties or others.
THESE OPERATING INSTRUCTIONS CONTAIN IMPORTANT INFORMATION ON THE SAFE, PROPER AND
ECONOMICAL OPERATION OF THE SWIMMING POOL PUMPS. STRICT OBSERVATION OF THE OPERATING
INSTRUCTIONS WILL HELP TO AVOID DANGERS, REDUCE REPAIR COSTS, SHUTDOWN TIMES AND INCREASE
THE RELIABILITY AND WORKING LIFE OF THE PRODUCT.
Section 1.

SAFETY INFORMATION

WARNING - Please read the following before installing your new automatic pool cleaner!
•
Hazardous suction can cause injury and drowning. Do not play with cleaner or hose or apply to body. Do not let
children use or play with pool cleaner. Turn off pump before attempting to clean unit.
•
Do not allow swimmers in pool while pool cleaner is operating.
•
Suction entrapment, injury and drowning hazard. If your pool has a dedicated suction port (vacuum port) for va-
cuuming or for an automatic pool cleaner, it must be covered when not in use. If your dedicated suction port does
not have a spring loaded cover (vacuum lock fitting) purchase one from your local pool store and install it before
connecting pool cleaner to dedicated suction port.
•
If your pool is exposed to large quantities of leaves, we suggest purchasing and installing an in-line leaf trap. A leaf
trap will provide more debris-loading capacity and also provides a water by-pass when the basket is full. It is very
important that the pump will get sufficient water flow!

BEFORE INSTALLATION

IMPORTANT FOR VINYL LINER POOL OWNERS:
Before installing the pool cleaner, examine the interior of your pool carefully. If your vinyl liner is brittle or has stones,
wrinkles or metal corrosion in contact with the bottom side of the liner, or has damage to the base or supporting walls,
do not install the pool cleaner before having a qualified professional perform the necessary repairs.
Section 2.
INSTALLATION
STEP 1: Unpack and check parts
1 - Cleaner Body - (1)
2 - Vacuum Seal - (1)
3 - Pipe and Nut Assembly - (1)
4 - Deflector Wheel 320mm and Lock - (1)
5 - Skimmer Adaptor - (1)
6 - Regulator Valve - (1)
7 - Regulator Cap - (1)
8 - Flow Gauge - (1)
9 - Hose Weight - (1)
10 - Hose - 1m sections - (9)
2
are trademark and/or registered trade-
TM