Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for FONESTAR ZS-1112R
Summary of Contents for FONESTAR ZS-1112R
- Page 1 ZS-1112 10-ZONE CONTROL FOR PRIORITY ACTIVATION IN ATTENUATORS INSTRUCTION MANUAL...
- Page 2 We take this opportunity to thank you for buying this product. We recommend you read the instruction manual before switching on the machine and follow the instructions that are given. Keep the manual for future reference. SECURITY AND THE ENVIRONMENT ELECTRICAL SECURITY Check that the current in the mains connection where the machine is to be installed corresponds to the power supply of the machine.
-
Page 3: Exemption Of Liability
The characteristics of the equipment and the content of the manual can change without forewarning. FONESTAR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the information supplied in this instruction manual, and specifically disclaims any implied liability for marketability or fitness for any other use. -
Page 4: Controls And Functions Front Panel
6.- ALARM OUT A/B: alarm output contacts, screw terminals. These contacts close automatically when the contacts are closed in the ALARM IN A/B input. Note: if you have more than one ZS-1112R control unit, connecting the output ALARM OUT A/B to the input ALARM IN A/B of the next control unit is recommended. - Page 5 DEVICE IDENTIFIER TABLES Place the microswitches ADDRESS of each of the ZS-1112R devices in the following positions to identify the device within the installation. Note: each ZS-1112R control unit must be in the same position as the corresponding ZSC-1110 zone system.
- Page 6 CONNECTION - Make the connections with the device and all the audio system components switched off and disconnected from the power supply. - Follow the instructions in the diagram below in order to connect the devices to each other correctly. - Once the connections have been made according to your needs, connect the devices to the power supply and switch them on.
- Page 7 EXAMPLE OF CONNECTION WITH SEVERAL ZS-1112R Example of connection of attenuator with priority through 24 V DC relay (detail) - 7 -...
-
Page 8: Cable Control
4.- Brown/White 5.- Orange 6.- Orange/White 7.- Green 8.- Green/White TECHNICAL SPECIFICATIONS ZS-1112R CHARACTERISTICS 10 zone control unit for priority activation in attenuators with 24 V relay. Extendable to 300 zones. INPUTS 1 zone extension, RJ45 2 alarm activation through contact closure, screw terminals... -
Page 9: Warranty
2 months after being conscious of the problem. It is only necessary to contact FONESTAR if it is impossible or imposes an undue burden for them to solve it. To benefit from this warranty it is necessary to show the proof of purchase with the date clearly visible, with no corrections or crossing out. - Page 10 - 10 -...
- Page 11 - 11 -...
- Page 12 www.f o ne star . c o m...