Sirius Satellite Radio Stiletto Stiletto Vechicle Kit Satellite Radio Installation And User Manual page 37

b. Power the Stiletto on. When it is completely powered up, press the
button on the left side of the vehicle dock or press the
control.
c. Use the Media Dial
FM channel. (Figure 26)
in which you want to store the selected FM channel as a preset. (Figure 27)
the Select button to exit and transmit on the selected FM channel. The Stiletto
will transmit on the selected FM channel.
note: The FM transmitter in your SIRIUS radio is automatically set to FM channel note: The FM transmitter in your SIRIUS radio is automatically set to FM channel
88.1. This may not be the best channel in your area. 88.1. This may not be the best channel in your area.
Tip: If you regularly travel between cities with different active FM channels, you Tip: If you regularly travel between cities with different active FM channels, you
may need to find channels that are not broadcasting in each city. The Stiletto can may need to find channels that are not broadcasting in each city. The Stiletto can
store multiple FM transmit channels as presets, so you can easily switch to the store multiple FM transmit channels as presets, so you can easily switch to the
best FM channel for each city. You will also want to set the FM channels that are best FM channel for each city. You will also want to set the FM channels that are
not broadcasting in each city as presets on your vehicle radio. not broadcasting in each city as presets on your vehicle radio.
5. You should now hear the audio from your SIRIUS radio over your vehicle's FM radio. If
the audio quality is not satisfactory, try moving the FM Extender Cable slightly to see if a
better signal can be obtained.
6. If you are mounting the FM Extender Cable in the headliner of the vehicle, skip this step.
When you are satisfied with the mounting location, remove the suction cup mounts and
peel the backing off the adhesive mounts. Permanently adhere it in the same position on
the glass (or A-Pillar), keeping it taut and as straight as possible. (Figure 28)
or the buttons on the remote control
Press and hold a preset number (0—9) on the vehicle dock
FM Transmit
Turn the Media Dial to
change the frequency.
Use the number keys to
recall or assign FM presets
90.1
figure 26 figure 26
FM button on the remote
to select the same
FM Transmit
Turn the Media Dial to
change the frequency.
Use the number keys to
recall or assign FM presets
90.1 FM1
figure 27 figure 27
[
FM
FM
Press
]

Installation