FAVI SmartStick User Manual

CONNECTING SMARTSTICK
1. Connect one end of SMARTSTICK
SMARTSTICK
adapter.
2. Plug the power adapter into a nearby power outlet.
3. Connect one end of HDMI extender cable into the
SMARTSTICK
4. Turn on the TV and select the appropriate TV SOURCE
input.
5. Insert batteries* (not included) into Remote Control and
plug USB receiver into USB port on the SmartStick
6. Follow the on-screen instructions to complete your
set-up.
*NOTE: Remote control requires two (2) AAA batteries to operate.
PROGRAM SMARTSTICK
LEARNING REMOTE
1. Enter IR Learning Mode, hold down
seconds on remote control
2. Press [ POWER ]
Press and hold
.
flash)
3. Press [ VOL + ]
Press and hold
4. Press [ VOL - ]
Press and hold
5. Exit IR Learning Mode, wait until red light on remote
control turns off (5-10 seconds).
NOTE: Quick red flashes following step 2 ,
3 & 4 indicates pairing is successful.
1
PLUG
®
and the other end into the included power
®
and the other end into the TV.
button on remote
[ POWER ]
on remote
(slow red flash)
[ VOL + ] on TV remote
on remote
(slow red flash)
[ VOL - ] on TV remote
2
S MARTSTIC K
For additional support please visit
www.favientertainment.com
®
TV
®
power cable into the
®
[ POWER ]
(until you see solid red light)
(slow red flash)
button on TV remote
.
(quick red flash)
.
(quick red flash)
Remote
>
CONNECT
.
®
for 3
.
.
(quick red
.
.
TV Remote
2 inches
TV
3
PLAY
<