Panasonic MK-F800 Operating Instructions Manual page 29

TROUBLESHOOTING
Problem
There is abnormal vibration and
noise during operation.
The texture and consistency of
the processed ingredients did
not turn out well.
 The Rubber Feet and/or the work top are not clean.
Æ Wipe off any dirt or stains with a clean damp cloth. The
Rubber Foot is only effective when placed on a clean,
w
smooth and flat surface.
 The ingredients used for processing is either too much or too
hard.
Æ Ensure that the ingredients used are as stated, reduce the
ingredients if it is over the stated amount.
 Some ingredients might be too difficult to process raw,
e.g.pumpkin.
Æ Precook might be necessary to soften the ingredients before
processing, i.e. until a fork can easily pierce.
 Ingredient size is not according to the preparation method.
Æ Prepare accordingly to follow the size stated.
 Processing certain ingredients at the same time may result in
lumps remaining for Frozen mode.
Auto Menu
w
 The Auto Menu's default processing duration is meant for the
stated ingredient amounts. Any other ingredient
amounts processed will affect the performance.
Æ Increase the processing duration by adjusting the Rotary
Dial and process till the desired texture and consistency.
Manual Menu
 The maximum ingredient amount and processing duration are
meant to serve as a guideline, lesser ingredient amount and
different ingredients will affect the performance.
Æ Process the ingredients with a suitable duration till the
desired texture and consistency.
Cause and Action
29