Download Print this page

AudioQuest FLX 16-2 Manual

Bulk (unterminated) speaker cable

FLX 16-2, FLX 14-2

Bulk Spool Termination Manual

Thank you for choosing AudioQuest. This manual provides instruction for preparing

and terminating a bulk (unterminated) speaker cable.

Please be careful when using sharp tools. We recommend wearing safety glasses.

To terminate AudioQuest speaker cables you will need the following tools:

• Sharp knife or razor blade

• 1 .5 mm. Hex (Allen) wrench (supplied with SureGrip 300, 500 & 1000

Series spade & banana plugs)

• Small Philips screwdriver (for 500 and 1000 Series connectors)

We recommend using the following tools, which can be found at:

audioquest.com/accessories, then click "Tools. "

• Paladin jacket stripper

• Ideal articulated wire stripper

If you have any questions or concerns – please call AudioQuest at (949) 585-0111

or email: info@audioquest.com

Table of Contents

Need help?

Do you have a question about the FLX 16-2 and is the answer not in the manual?

Page 1 Series spade & banana plugs) • Small Philips screwdriver (for 500 and 1000 Series connectors) We recommend using the following tools, which can be found at: audioquest.com/accessories, then click “Tools. ” • Paladin jacket stripper • Ideal articulated wire stripper If you have any questions or concerns – please call AudioQuest at (949) 585-0111 or email: info@audioquest.com...
Page 2 Be careful not to cut the conductor wires. Ensure all connections are secure. Step 3 Using a wire stripper, remove ½” of insulation from each wire. If you have any questions or concerns – please call AudioQuest at (949) 585-0111 or email: info@audioquest.com...

Flx 14-2