Please take these safety precautions under the following conditions 1) Servicing the vehicle When servicing your vehicle (i.e. washing your car), the ace security system should be in Override(Valet) Mode. There is a safety hood pin switch under the hood that deactivates the remote starter function if the hood is open.
8) ERR(Error report) : Displays when the Ace Security system is not operated properly 9) Battery : Displays remaining battery life 10)ATREV : Indicates if the Ace Security system is in Automatic remote start memory mode in a manual transmission vehicle.
Press the button(No.1) two times consecutively for stopping the remote start. The icon is moved to the right icon by pressing the button(No.1) in the programming mode and the data is increased one by one in its figure by pressing the button(No.1) in the detailed programming mode 2) Button No.
will arm if not armed already and the Siren will activate and the Parking Lights will flash. In order to disengage Panic mode, Press Button No. 1 for approx. a 1/2 seconds. 3) Car Find Press Button No. 2 for approx. 1/2 second to activate this feature in order to find the location of the vehicle or monitor the status of the vehicle by looking at the remote LCD icons 4) Trunk Release...
To make your siren mute when arming or disarming the vehicle, programming the Siren turned off in the programming mode. But the Siren will still activated for the mode of Panic regardless of whether or not the Siren is in the Siren mute mode. 2) Override (valet) mode.
park position. Step 2: pull off the key off. Step 3: single chirp and parking light from the vehicle. Step 4: Close the door after exit. Step 5: Press the button No. 1(lock button). Note. This function will be canceled if you didn’t activate the parking brake, press the foot brake during the process, shut down the engine before completing this function or engaged in Override(valet) mode.