Page 1
LCN-IVH/-IV and a further LCN-IV is needed. The LCN-IVH/-IV is LCN-IVH connected to the LCN module by using the supplied flat cable. Over a four pole, max. 50m in length, shielded cable, the LCN-IVH/-IV is joined to the other LCN-IV - see page 3.
Page 2
LCN-IVH/-IV´s. Guidelines to I-port connections: The I-connecting cable to the LCN module can be extended up to a maximum of 50m with an LCN-IV (all diverted distances added together), use 0,8mm . The distance from the LCN-NUI to a maximum of 2 GT-key sensors, must not be longer that 20m.
Page 3
LCN-IV/-IVH ® Installation guide Local Control Network illustr. 3: The LCN-IVH as extension illustr. 4: The LCN-IVH as impulse counter to the periphery to the periphery The condenser is only necessary with inaccurate signals. Value within 100-470nF. LCN-IV 470nF 470nF...
Page 4
DIN rail mounting 35 mm (DIN50022) LCN-IV installation: in flush mounted boxes dimensions (WxLxD): approximately 22mm x 12mm x 13mm Technical information and images are non binding. Changes are reserved. Technical hotline: +49 5066 998844 or www.LCN.de LCN-IVH D12/2012 ISSENDORFF KG, 31157 Sarstedt...