Advertisement
Advertisement
Table of Contents
Summary of Contents for MT-Electronic AQUA LOW FOG VARIO 8
- Page 1 AQUA LOW FOG VARIO 8 & 10 USER MANUAL...
- Page 2 The following is to keep in mind before putting the machine into operation and carry out: • The machine must be in balance • The pump selector switch (illuminates blue in the operating and indicating that the feed pump operates) must not be pressed •...
- Page 3 DMX addressing By the red rotary switches DMX channel assignment: Channel 1: Fog output 0-100% Channel 2: Fan speed 0-100% Channel 3: The severity of the fog Output starts at 50% slider setting (50% = 0 output, 100% = 100% output) The higher the output the heavier the fog gets.
- Page 4 The filling process: After pressing the red power switch it starts pumping from the water tank to fill water into the machine. The pump selector switch illuminates while operating After the water has been completely drained from the water tank, the red power switch of the machine must be switched off again.
- Page 5 See image below ATTENTION: The water must be pumped out daily from the machine! Drain before transportation and storage! Do not open machine while connectected to power and during operation! MT-ELECTRONIC Uferpromenade 15 2325 Himberg Austria, Europe Tel.: +43 699 12334455 Email:...
Need help?
Do you have a question about the AQUA LOW FOG VARIO 8 and is the answer not in the manual?
Questions and answers