To Set The Needle - Singer CLASS 99 Instruction Manual

Class 99 & 99K

To Set the Needle

Select the correct needle according to the table on page 11. Be sure that the
needle is not blunt or bent. Raise the needle bar to its highest position and
loosen thumb screw H, Fig. 13 in needle clamp. Push needle with its flat side
toward the right up into needle clamp as far as it will go, then tighten the thumb
screw H. A screwdriver slot is provided for stronger clamping of needle, required
for attachments driven from needle clamp hub.
Page 12
Table of Contents | Previous Page | Next Page