Download Print this page

LifeStraw Community Installation Manual

Water purifier for community use

Table of Contents

Table of Contents

Need help?

Do you have a question about the Community and is the answer not in the manual?

Page 14: Installation Guide
STEP 1 STEP 2 Assemble connector Install the Auto fill Kit on the LifeStraw Community 1. Unscrew the connector from the Auto fill box 1. Place the Auto fill box inlet through the hole on the 2. Check which size of connector you will choose LifeStraw Community.
Page 15: Daily Maintenance
Users will enjoy LifeStraw® Community preventing drinking water shortages in the event of water cuts or disruptions. The LifeStraw® Community Autofill will ensure communities have constant access to safe drinking water.
Page 16: How To Replace The Filter Cartridge
Spacer rings Dirty water container Backwash handle Safe storage container Taps Lock Backwash bottle Empty the LifeStraw Community and place it on the ground. Use a screwdriver to remove all four screws under the spacer ring. Then carefully remove the two parts of the spacer ring.
Page 17: Screw Holes
Disconnect the cartridge from the hoses. Unscrew the two screws. Before disconnecting the hoses, number each hose with a permanent marker, and also write their connecting position on the cartridge to ensure that they are reconnected properly. Screw holes Place the new cartridge on its position on the spacer body.