Some Dos And Don't On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
To achieve the utmost in enjoyment and performance, please read this manual carefully before attempting to operate the unit in order to became familiar with its features, and assure you years of faithful, trouble free performance and listening pleasure. Important Notes * Keep instructions: the safety and operating instructions should be retained for future reference.
Page 4
DANGEROUS VOLTAGE There is high voltage, that may be of sufficient magnitude to constitute a risk of electric shock to persons is present within this product enclosure. ATTENTION The owner manual contains important operating and maintenance instruc- tions, for your safety, it is necessary to refer to the manual. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING.
Battery Safety Guidelines PLEASE PHOTOCOPY AND DISPLAY Used correctly, domestic batteries are a safe and dependable source of portable power. Problems can occur if they are misused or abused — resulting in leakage or, in extreme cases, fire or explosion. Here are some simple guidelines to safe battery use designed to eliminate any such problems.
Table of Contents Some Dos And Don't On The Safe Use Of Equipment ..............1 Important Notes ..........................2 Battery Safety Guidelines ........................4 Product Overview ..........................6 The Unit ................................ 6 Front View ............................. 6 Top View ..............................6 Rear View .............................. 6 Remote Control Overview ..........................
Product Overview The Unit 1. IR sensor Front View Point the remote control at the IR sensor. 2. Display panel Show the current status. 3. D / SET TIME Search within an audio file. Set the clock and date. 4. VOL +/− I / J Adjust volume.
Product Overview Remote Control Overview 3. Bluetooth ( ) / PAIRING Select the Bluetooth source. Press and hold Cleard the Bluetooth pairing history. 4. FM / DOCK Select the TUNER source. Select Dock source. 5. DISPLAY/SET TIME Display current information. FM mode: Display RDS information USB mode: Display ID3 information Set the clock and date.
Before use Connect to an external device Connect power AUDIO IN You can also listen to an external audio device After you made all necessary connections, insert through this unit. the AC power plug into a wall outlet, and your 1.
Get started Turn on * Do not use any batteries other than those specified. Press STANDBY, the unit switches to the last Do not heat or disassemble batteries. Never selected source. throw them in fire or water. Do not carry or store batteries with other Switch to standby mode metallic objects.
Play Play from USB Play from iPod/iPhone/iPad You can play MP3/WMA files copied on the USB storage device. You can enjoy audio from iPod/iPhone/iPad 1. Select a USB storage device, press USB through this unit. button. 2. Insert the USB storage device, the play Compatible iPad/iPhone/iPod starts automatically.
Page 12
Play Listen to the iPod/iPhone/iPad Play from an external device 1. Press DOCK button to select dock source. You can also listen to an external audio device 2. Place the iPod/iPhone/iPad into the dock. through this unit. 1. Press AUDIO IN button to select the source, is displayed.
1. Turn on the Bluetooth function on your device. 2. Search for other Bluetooth device with your device. 3. Select “ ” in the pairing list. BTD602 4. Enter default password “ ” if necessary. 0000 5. Press and hold Pairing Cleared button (PAIRING) more than 2 seconds to clear pairing mode.
Listen to radio Note: Program radio stations manually Only FM radio reception is available on this unit. You can program a maximum of 20 preset radio stations. Tune to a radio station 1. Tune to a radio station. 2. Press PROG button to activate the program Note: mode.
3. When the clock been display,press the OK button to synchronize RDS clock. ● If no time signal is received, [NO CT] is displayed. Note: * The accuracy of the transmitted time depends on the RDS station that transmits the time signal. Other features Set the alarm timer Snooze alarm...
Troubleshooting If you are having a problem with your system, check this list for a possible solution before calling for service. If you cannot solve the problem from the list below, or the system has been physically damaged, call a qualified person, or your dealer, for service. No power ・...
Product information General information AC power ....................... 100-240V ~ 50/60Hz Output ...............................7.5V 3.5A Frequency Response ....................100Hz ~ 20KHz Siignal to Noise Ratio ..........................> 70 dB Audio Input ..........................600 mv Operation Power Consumption ..................5 x 2 W RMS Standby Power Consumption (clock display) .................≤...
Page 19
The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/ EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries as unsorted municipal waste, but use the return and collection systems available.
Need help?
Do you have a question about the BTD602 and is the answer not in the manual?
Questions and answers