Do you have a question about the CW-1100AP and is the answer not in the manual?
Questions and answers
Summary of Contents for CREWAVE CW-1100AP
Page 1
User’s Guide CW-1100AP Access Point We are always on-line : http://www.crewave.com Copyright 2000 CREWAVE Co.,Ltd. All Rights Reserved...
Page 2
NOTICE The User’s Guide described in this book is a licensed product of CREWAVE Co.,Ltd. l Microsoft MS-Windows and MS-DOS are trademarks of Microsoft Corporation. l Adobe Acrobat is a registered trademark of Adobe Systems Inc. All other brand and product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.
CREWAVE 11Mbps Wireless LAN Access Point. The CREWAVE 11Mbps Wireless LAN Access Point(this “AP”) is the wireless Access Point for the 802.11b compliant. This AP extends the range of your cabled Ethernet network(a wired Local Area Network), providing easy network access to mobile users and difficult to wire locations.
Internet via a shared modem. However, with Ad-hoc networking your computer is only able to communicate with other wireless computers that are within range and in your wireless workgroup. - Infrastructure Networking CREWAVE Wireless LAN PC Card...
Access Point and connects to a different Access Point. By physically spreading Access Points throughout the network environment, clients can always be connected regardless of where they are located or roam. INTRODUCTION CREWAVE Wireless LAN CREWAVE Wireless LAN PC Card...
. Wired Link Tx, Rx (Green Color) . Wireless Tx, Rx (Green Color) PREPARATION To achieve optimum performance of your CREWAVE Wireless LAN: Evaluate the area in which the network will be arranged and plan the layout CREWAVE Wireless LAN PC Card...
Page 8
The key factors in the layout of your CREWAVE Wireless LANs are the evaluated area in which the network will be deployed and plan the layout accordingly. The key factors in the layout of your LANs are the distance between the Access Points and the spatial and structural design of the network area.
2. Plug in the power cord to the power outlet and adapter. Plug in the DC output to “DC in”. Make it sure that the Power LED is on. If the Power LED is not on, please check the connections of the power cord. CREWAVE Wireless LAN PC Card...
4. You can place the AP on a flat surface as a table or cabinet by the fixed Stand. AP Manager Utility Verify that all CREWAVE 11Mbps Wireless LAN Access Point ( this “AP”) have been properly installed, and have been powered-on.
On the left side of the AP Manager screen (”A”), it shows the list of Access Points using the same network segment. If you select the Item in “A” part, you can see information related to the Item (AP or Group) in “B”. Configuration Utility CREWAVE Wireless LAN PC Card...
Page 12
2. Click the “Config” button in the selected AP’s Information box and then select the “Wireless Operational Settings” Item. 3. Enter a unique ESSID name to be used for the Access Point. ESSID must consist of alphanumeric characters (Max. 32 characters), including ‘_’ except blank and the special characters. CREWAVE Wireless LAN PC Card...
Page 13
Please keep the password at a safe place or keep it where it may not get lost. 6. Click the “OK” button after setting “Encryption”. 7. In the “IP Setting” Item, set a IP Address and Subnet Mask after consulting with Network Administrator for normal Network. Click on “OK”. CREWAVE Wireless LAN PC Card...
Limited Warranty CREWAVE Co.,Ltd CREWAVE Wireless LAN PC Card...
Page 15
All CREWAVE products are covered only by the CREWAVE Limited Warranty in the country in which they were purchased. Service for your CREWAVE product in a...
Page 16
All implied and express warranties are limited in duration to the limited warranty period. No warranties apply after that period. To obtain warranty service for your CREWAVE products, you may contact CREWAVE Authorized Service Provider, or you may contact CREWAVE.
Need help?
Do you have a question about the CW-1100AP and is the answer not in the manual?
Questions and answers