Taking Photos & Videos - Intel EP110 User Manual

5 TAKING PHOTOS & VIDEOS
The Camera 2.0 app lets you take and share pictures and videos.
To start the Camera 2.0 app:
• In the App Launcher, touch
Camera buttons and icons
Once opened, the Camera 2.0 app displays the following icons and buttons:
Touch to switch mode: Photo, Video, Burst, PerfectShot, and
Panorama. Smile mode will be available only in Photo mode.
Selecting a new mode changes the icon on the shutter button to
match the current mode.
Use the Shutter button to take a picture or shoot a video.
Touch to switch between rear-facing and front-facing cameras.
Touch to toggle Face Detection on/off.
Touch to adjust Flash settings.
Touch to access Hints, Geo Location, Picture Size, Scenes,
Exposure, White Balance, ISO setting, and Self-Timer.
TIP: To zoom in or out, pinch in the view window to bring up the zoom slider.
Slide the dot up to zoom in (+); slide the dot down to zoom out (-)
5.0 TAKING PHOTOS & VIDEOS
.
To take a picture:
1. Frame your subject in the display.
2. Touch the Shutter button to take your picture and save the image to the
Social Gallery.
To shoot a video:
1. From the Camera 2.0 app, touch the Mode button, and then select
2. Touch the Shutter button to begin recording. When done, press the Shutter
button again to stop recording and save the video to the Social Gallery.
Use Camera HDR mode:
Select High Dynamic Range mode to give your pictures the most vivid colors
and richest details.
Use Camera Smile mode:
In this mode, the camera will automatically snap a photo as soon as it detects
that all subjects are smiling. (The shutter button is effectively disabled.)
Use Camera Burst mode:
When the camera is set to Burst mode, each shutter press will capture a
series of ten images and save them to the Gallery. Select Fast or Slow to
determine the amount of time between images.
Use Camera PerfectShot mode:
When you press the shutter button in PerfectShot mode, the camera will
automatically snap ten photos and save the best one to the Gallery.
Use Camera Panorama mode:
Select the Panorama mode to sweep across a scene (horizontally or vertically)
and capture multiple images that will be automatically stitched together into
a single panoramic image. During Continuous capture, several on-screen
elements assist in capturing and aligning images:
• The arrow indicates the direction to move the camera for the next shot.
• Touch the shutter button to finish capturing multiple images.
• The counter displays the number of images collected for this panorama.
• A semi-transparent overlay of the previous image assists in aligning the next
image in the sequence. Simply move the camera until key details on the
two images are aligned, and the next image is automatically captured.
NOTE: When using Panorama Mode, you must pan far enough to take at least
two pictures. If you do not touch the shutter button, the camera will stop
taking pictures when it reaches the maximum number of shots.
.
PAGE : 22