Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Audio Enancement K-SHH14
Summary of Contents for Audio Enancement K-SHH14
- Page 1 1.9GHz Wireless Handheld Microphone K-SHH14 Rev.1.0...
- Page 2 1.9GHz Wireless Handheld Microphone, model K-SHH14 has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.
- Page 3 MEDICAL: Consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they are adequately shielded from external RF (radio frequency) energy. The unit operates in the frequency range of 1.92 GHz to 1.93 GHz. Do not use the unit in health care facilities if any regulations posted in the area instruct you not to do so.
-
Page 4: Important Safety Instructions
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. - Page 5 Precautions Turn off the power supply when inside an aircraft. The product might interfere with operational safety of the aircraft. Do not attempt to disassemble or shortcircuit rechargeable batteries. An exploding battery or leaking battery fluid may result in fire, injury and burns. Avoid placing the product in unstable conditions.
-
Page 6: Product Care
[Precautions for use] • Operating temperature: 5 °C - 35 °C {41 °F - 95 °F} When calculating the battery life, note that temperatures below 10 °C {50 °F} shorten the battery duration. • Do not disassemble the product or touch internal parts. •... - Page 7 CONTENTS Important Safety Instructions Precautions Major operating controls and their functions Inserting a battery Using the microphone Connecting an external device Replacing a battery Charging a rechargeable battery Troubleshooting Specifications Rev.1.0...
- Page 8 [Inside the battery cover] [Slide switch] Select s receiver connection mode [OFF] [ON] [rear] [side] OFF[Same receiver connection]Default [1]Microphone opening ON[Different receiver connection] This opening picks up the speaker’s voice. [2] Charge indicator (red) [CHG] Indicates the charging status. ON: Charging completed . OFF:, No connected a charge connector or no battery installed.
- Page 9 When an external device is connected to this terminal, audio from the [1]Microphone opening is muted. [8]DC input terminal (rear) Used to connect the charger for charging the battery installed in the microphone and to supply power to the microphone. [9]Battery cover(side) To remove the battery cover, push it down and pull it off.
-
Page 10: Inserting A Battery
Inserting a battery • To insert a battery, turn off the power of the microphone, and make sure that the microphone is not connected to the charger. • To replace a battery, refer to “Replacing a battery”. Note: • Do not touch the battery poles with hands. Otherwise poor contact or noise may result. If dirty, wipe off with a dry soft cloth. -
Page 11: Using The Microphone
Using the microphone Battery indicator Talk push-button switch Talk button switch 1 To turn on the microphone, press its LINK-button The battery indicator of the microphone lights. Memo: When [BAT] indicator RED Blink, the registration to a receiver is required. Microphone slide switch( inside battery cover ) ON. -
Page 12: Connecting An External Microphone
Connecting an external microphone You can connect an external device (for example, a portable CD player) to the external input terminal and transmit the audio to the receiver. External input terminal 1 Turn off the power of the microphone and the external device. 2 Connect an external device. -
Page 13: Replacing A Battery
Replacing a battery • To replace the battery, turn off the power of the microphone, and make sure that the microphone is not connected to the charger. Note: • Do not touch the battery poles with hands. Otherwise poor contact or noise may result. If dirty, wipe off with a dry soft cloth. -
Page 14: Charging A Battery
Charging a battery DC input terminal Charge indicator Power push-button switch Micro-USB plug [rear] 1 Turn off all microphones. 2 Connect the micro-USB plug of the charger to the DC input terminal of the microphone. When inserting the micro-USB plug into the DC input terminal, of the microphone. After connecting the microphone to the charger, the charge indicator (red) indicates the charging status as follows: ON: Charging completed . - Page 15 • Charging takes up to 4 hours, but the charging time varies depending on status of use. • Charging at a temperature outside the normal range may result in significantly longer charging times. Note, however, that charging times may become longer even within the operating temperature range, if the temperature of the microphone is higher or lower than the normal condition.
-
Page 16: Troubleshooting
Trouble shooting Before asking for repairs, check the symptoms with the following table. Contact a dealer if the suggested remedies do not correct the problem or if the problem is not described below. Symptom Cause/solution • Is the battery charger connected to the microphone (with no battery)? >>... - Page 17 Microphone is out of range. Please use in the range Does not use(CHG LED is Yellow blinking) Is the receiver's power supply on?. Please check a receiver's power supply. Rev.1.0...
-
Page 18: Specifications
Specifications Radio Standard DECT Frequency Range: 1,920.0~1,930.0MHz Coverage 20m (NORMAL) 30m (Hi POWER) Microphone type Unidirectional electret condenser microphone Audio Frequency Response 100Hz to 8 kHz (From Microphone to receiver) External input –14 dBV ø3.5 stereo mini jack (monaural mix) Battery Lithium Ion Battery (Chargeable) Battery life...
Need help?
Do you have a question about the K-SHH14 and is the answer not in the manual?
Questions and answers