Table of Contents
Advertisement
GeTTInG sTaRTeD
1 . Connect your Router's ADSL cable to your ADSL connection .
If you are replacing an existing Router or gateway, this
may require unplugging the existing gateway .
note: If a telephone is connected to the same telephone
jack then an ADSL Splitter/Filter is required . This
can be purchased from your local retailer .
2 . Plug the Router's power supply into a wall outlet .
3 . Put the CD into your computer . If the CD doesn't
open automatically, please browse to your CD drive
and double-click on the Belkin Setup CD icon .
Setup
4 . Click the Setup icon on the CD menu .
3
Advertisement
Table of Contents
