eaglelighting EL-HYP-124 Installation Manual

+ PLEASE READ THIS GUIDE CAREFULLY BEFORE
INSTALLING OR MAINTAINING THIS EQUIPMENT.
+ DATA SHOULD BE USED AS AN INDICATION ONLY.
+ GOOD ELECTRICAL PRACTICES SHOULD BE FOLLOWED AT ALL TIMES.
+ MUST ONLY BE INSTALLED BY A LICENSED ELECTRICIAN.
DIMENSIONS DIAGRAM
A
C
PRODUCT CODE
LIGHT SOURCE/DESCRIPTION
Hyperion Ag EXPOSED T-BAR
EL-HYP-114-_01-___ 1 x 14W T5
EL-HYP-124-_01-___ 1 x 24W T5
EL-HYP-128-_04-___ 1 x 28W T5
EL-HYP-135-_07-___ 1 x 35W T5
EL-HYP-154-_04-___ 1 x 54W T5
Hyperion Ag SURFACE MOUNTED
EL-HYP-114-_11-___ 1 x 14W T5
EL-HYP-124-_11-___ 1 x 24W T5
EL-HYP-128-_14-___ 1 x 28W T5
EL-HYP-135-_17-___ 1 x 35W T5
EL-HYP-154-_14-___ 1 x 54W T5
ACCESSORIES
EL-ACC-600-000 PLASTER FRAME ACCESSORY
EL-ACC-602-000 PLASTER FRAME ACCESSORY
EL-ACC-606-000 PLASTER FRAME ACCESSORY
www.eaglelighting.com.au/hyperion_ag
B
(NOM) DIMENSIONS
A B C CUTOUT WEIGHT
600 300 100
UNLESS OTHERWISE SPECIFIED: FINISH: DEBUR AND
DIMENSIONS ARE IN MILLIMETERS BREAK SHARP DO NOT SCALE DRAWING REVISION
SURFACE FINISH: EDGES
TOLERANCES:
LINEAR:
ANGULAR:
NAME SIGNATURE DATE TITLE:
DRAWN
CHK'D
APPV'D
MFG
Q.A MATERIAL: Installation Instruction DWG NO. A1
600 300 WEIGHT: SCALE:1:1 100 SHEET 1 OF 1
1200 300 100
1500 300 100
1200 300 100
600 300 100
600 300 100
1200 300 100
1500 300 100
1200 300 100
600 300 102 605 310
1200 300 102 1205 310
1500 300 102 1505 310
HYPERION Ag
INSTALLATION GUIDE
THIS GUIDE IS FOR THE FOLLOWING
LUMINAIRE VARIATIONS:
+ T-Bar
+ Surface Mounted
+ Plaster Recessed
SPECIFICATION
Luminaire's light distribution is direct.
Denotes which light source/light sources
that can be supplied with the luminaire.
Several symbols next to the same
luminaire indicate that the luminaire is
available in different designs.
Luminaire is designed for the T5-light
source's unique characteristics. The small
diameter of the fluorescent lamp has
created new conditions for light control.
IP classification:
IP20 : Protected against solid objects
greater than 12 mm, e.g. persons fingers.
Class I : Appliances with functioning
insulation. Equipped with an earth
termination.
Luminaire can be obtained in designs with
emLED.
Luminaire is available in designs for
conventional emergency lighting operation.
This luminaire is not suitable for covering
with thermally insulating material
RCM indicates a device's compliance with
applicable ACMA technical standards.
DIFFUSER OPTIONS
Y19
Y5
Y7
Y20
CDP DELTA
VARIATION
Standard
DSI/STD terminal block
DALI/STD terminal block
Standard/Fused terminal block
DSI/Fused terminal block
DALI/Fused terminal block
1
1
SUFFIX
-100
-200
-300
-600
-800
SUFFIX
-000
-100
-200
-400
-500
-600