Download Print this page

Xiaomi Amazfit Manual

Equipment

1. Bracelet

2. USB cable

3. Instruction and guarantee

Amazfit Band contains the main unit and removable bracelet. A touch button is

device, you must connect the USB cable to the suitable connector, which is

located on the back of the bracelet (see image below). Connect the other end

of the USB cable to a port with a nominal output voltage of 5V, the output current

of the power adapter of the phone or computer connector should be 500mA or

more.

Amazfit Band

located on the front of the main unit.

A: Main unit;

С: Sensor button;

B: Removable bracelet.

Touch the sensor button. If the

bracelet display does not light up

or battery level is low, please

charge the device. To recharge the

XIAOMI-MI.COM

Table of Contents

Do you have a question about the Amazfit and is the answer not in the manual?

Page 1 1. Bracelet 2. USB cable 3. Instruction and guarantee Overview Amazfit Band contains the main unit and removable bracelet. A touch button is located on the front of the main unit. A: Main unit; С: Sensor button; B: Removable bracelet.
Page 2 To start working, you need to touch the sensor button of the bracelet, then the display lights up. Swipe up / down to view all Amazfit Band functions. To select a specific function, click on the icon with its image. Move left / right to change the interface.
Page 3 1. Turn on the display; 2. Move up / down; 3. Function selection; 4. Move to the right / left. Main parameters Title: Amazfit Band; Model: A1702; Water resistance level: 50 meters; Operating temperature: 0 °С - 40 °С; Wireless connection type: Bluetooth 4.0;...
Page 4 In the fastener of the bracelet and the copper contacts of the charging cable, lead is contained in a small amount. This product complies with the European RoHS and environmental standards; manufacturers still cannot replace or reduce the aluminum content of the copper alloy. XIAOMI-MI.COM...