Hip Street Keychain Camera User Manual

Hip Street
Keychain Camera User Manual
Specification
3 in 1 Digital Camera:
Image Sensor:
Resolution:
Color:
Lens:
Capture Range:
Memory:
Capacity:
POWER:
Computer Interface:
Note: The quantity of compressed pictures depends on the scene
complexity.

System Requirement

OS: Microsoft Win98SE/2000/ME/XP/Vista
Mac V9.x/X.x*
Hard Disk Space: 200MB or above
Memory: 32MB RAM or above
USB interface and CD-ROM
Color Monitor (at least 800x600 24 bits or above)
*Driver for Mac OS can be downloaded from included CD
Functional Parts of the Camera
Viewfinder
Lens
Getting started
1.
Load battery to the correct polarity marked on the battery door.
2.
Turn the camera ON by pressing MODE button.
Precautions:
While connecting the camera to your computer, you DO NOT need
a battery as the camera would draw the power needed from the
computer through the USB interface.
Before using the PC-Cam function, please download all photos
from your camera onto your computer to avoid losing any photos.
Digital Still Camera
Video Capturing
Conferencing (Web cam)
CMOS Sensor
VGA 640x480 Pixels
QVGA 320x240 Pixels
24 bits
Fixed Focus=5.0mm F/2.8
0.5m~infinity
Built-in 8MB SDRAM
60-105 pictures (Compressed VGA)
25 pictures (VGA 640x480)
240-410 pictures (compressed
QVGA)
102 pictures (QVGA 320X240)
1 AAA Alkaline battery
USB
Shutter Button
LCD
Mode Button
Buzzer
Strap hook
Battery Door
Warning:
1. If you don't use the camera for a long time, please take out the
battery. Photos will be lost when the battery is taken out.
Please save your images to a computer before taking out the
battery.
2. Please follow local regulations when disposing of used batteries
3. If the camera is not used in 30 seconds. It will enter standby
mode automatically to save battery energy. You may press mode
button to restart the camera operation again.
Software installation
Attention:
Make sure you install all the necessary software in your computer
before you connect the camera to a computer.
1. Kindly close all opened software applications on your computer
before installing the software.
2. Insert the CD-ROM into the computer CD -ROM drive
3. The CD user interface screen will automatically launch.
4. Click on the Install Digital Camera Driver icon to install camera
driver first.
5. If you want to install the application software of Arcsoft Photo
Impression en video impression included in the CD, click on the
Install Photo Impression or install video impression icon to install
it.
Note: 1.Please install DirectX9 before the installation of video
impression.
2. If the setup screen doesn't appear after loaded the CD,
then you can manually start it by double-clicking the "My
Computer" Icon on your desktop, then double click the icon
for the CD-ROM drive.
Important:
For Windows98, Microsoft® DirectX 8.0 or a higher version is
required to be installed before driver installation. If there is no
DirectX 8.0 on your PC, please install it first. The DirectX 8.0 is
included in the CD supplied under the "DirectX" folder, your can
run the dxsetup.exe to install it.
Camera functions operation.
If the MODE button is pressed consecutively, the camera LCD
display will show the following symbols: