Advertisement
Quick Links
Item Number: 002-0016
Active Stylus Quick Guide
© Copyright 2012 Perceptive Pixel, Inc. ALL RIGHTS RESERVED
Stylus and Charger Overview
1. Plug the stylus charger into a USB port on your server using the supplied USB cable.
2. Place the stylus into the charger to charge it. Charging time from a full discharge is 2.5 hours.
Charger LED:
Blue – no stylus found
Yellow – charging
Green – charge complete
A fully charged stylus should be operational for about a week. Usage may affect operational duration.
The stylus has a button near the tip with tipward, downward, and tailward positions. The stylus also has
an indicator LED at the end. When removed from the charger, the stylus LED will briefly turn orange
before turning to its appropriate state as described on the next page.
Button
Advertisement
Summary of Contents for Perceptive Pixel 014800
- Page 1 Item Number: 002-0016 Active Stylus Quick Guide © Copyright 2012 Perceptive Pixel, Inc. ALL RIGHTS RESERVED Stylus and Charger Overview 1. Plug the stylus charger into a USB port on your server using the supplied USB cable. 2. Place the stylus into the charger to charge it. Charging time from a full discharge is 2.5 hours.
- Page 2 4. If the stylus touch response seems offset, see the troubleshooting section of your Multi-Touch Display documentation. It is possible that your PPI display may need calibration. If you have any questions contact your Perceptive Pixel, Inc. representative as follows: Web: https://support.perceptivepixel.com...
-
Page 3: Regulatory Notices
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by Perceptive Pixel may void authority to operate the equipment.