Summary of Contents for Embed RAD-002
- Page 1 Embed Wireless U.S.A. Equipment Installation Guide Revised – 20 April, 2012 www.embedcard.com...
- Page 2 Embed shall have any liability to any person or entity with respect to any loss or damage caused or alleged to be caused directly or indirectly by the instructions contained in this document or by the computer software or hardware products described herein.
-
Page 3: Table Of Contents
Product Directory ............................ 5 Embed Wireless Device/Client ......................5 Embed Wireless Coordinator/Server ....................5 Embed Wireless Client/Device Game Installation ..................6 Embed Wireless Server/Coordinator Game Installation ................7 FCC Compliance Statement ........................8 Waste Electrical and Electronic Equipment (WEEE) Statement..............9... -
Page 4: Overview
Embed Wireless System. Please observe electrostatic discharge precautions for handling or installing this equipment. Power Supply Details Range The Embed Wireless should be operated with a power supply with a voltage between 9 – 15 V, which can supply at least 300 mA. Other information and warnings: •... -
Page 5: Product Directory
Product Directory Embed Wireless Device/Client Embed Wireless Device/Client: The wireless client allows for a cable The wireless client allows for a cable-free connection between Controller and Embed ontroller and Embed Wireless Coordinator/Server’s. Wireless Coordinator/Server’s. Embed Wireless Coordinator/Server Embed Wireless Coordinator/Server:... -
Page 6: Embed Wireless Client/Device Game Installation
Step 3: Connect and orient the antenna straight up or down. Note 1: Embed Wireless should not be installed in, nearby or on metal enclosures (such as a full metal cabinet), otherwise performance may be severely degraded. Note 2: Embed Wireless should be installed so that it is more than 20cm from any possible human bodies. -
Page 7: Embed Wireless Server/Coordinator Game Installation
Step 2: Connect and orient the antenna straight up or down. Note 1: Embed Wireless should not be installed in, nearby or on metal enclosures (such as a full metal cabinet), otherwise performance may be severely degraded. Note 2: Embed Wireless should be installed so that it is more than 20cm from any possible human bodies. -
Page 8: Fcc Compliance Statement
• Consult with the dealer or ask an experienced radio/TV technician for help. Any changes or modifications to this equipment not expressly approved by Embed could void the user’s authority to operate this equipment. Embed International PTY LTD... -
Page 9: Waste Electrical And Electronic Equipment (Weee) Statement
Waste Electrical and Electronic Equipment (WEEE) Statement Embed complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE). This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact health and the environment, if not properly disposed. -
Page 10: Declaration Of Conformity
Australia 6017 Declare under our sole responsibility that the product, Product: EI-WIR-180 Embed Network Adapter 2.4GHz IEEE 802.15.4 RAD-002 Embed Network Adapter 2.4GHz IEEE 802.15.4 Fulfills the essential requirements of the directive 1999/5/EC as attested by the conformity with the...
Need help?
Do you have a question about the RAD-002 and is the answer not in the manual?
Questions and answers