Download Print this page

Linxcel ThumbDrive D.J MC-111A Manual page 2

Advertisement

1. PLAY/PAUSE
Attaching pen drive to our Thumbdrive D.J and you will see the LED solid; then
Thumbdrive D.J will automatically search for mp3 files stored in pen drive. When the
LED is blinking, press PLAY/PAUSE button afterwards. To press PLAY/PAUSE one more
time, then it will switch to pause mode.
2. NEXT: Select the next media track.
3. PREV: Select the previous media track.
4. RESET: When system error happened, pressing RESET button to recover it.
(All changes will be back to defa ult setting)
5. Channel Select: refer to chart listed as below to select available frequency.
6. Thumbdrive D.J will work through any attached audio sources, like mp3 portable player,
PDA and CD player.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions.
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may
cause undesired operation.
Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by
the part responsible for compliance could void the user's authority to operate the equipment.
LED1 LED2 LED3 LED4 Frequency
● LED ON
88.1 MHz
88.3 MHz
88.5 MHz
88.7 MHz
88.9 MHz
106.7 MHz
106.9 MHz
107.1 MHz
107.3 MHz
107.5 MHz
107.7 MHz
107.9 MHz
○ LED OFF

Advertisement

loading