Page 1
Art’s-Way Manufacturing Co., Inc. Model V180 Manure Spreader Operator’s Manual & Illustrated Parts List H610120 Issued January 2018...
Page 2
This symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS IN- VOLVED. The message that follows the symbol contains important information about your safety. Carefully read the message. Make sure you fully understand the causes of possible injury or death. IF THIS MACHINE IS USED BY AN EMPLOYEE, IS LOANED, OR IS RENTED, MAKE SURE THAT THE OPERATOR UNDERSTANDS THE TWO INSTRUCTIONS BELOW.
V180 Manure Spreader is for reference only. This manual does not replace nor is it to be used for any machinery that may be attached to or used in conjunction with the V180 Manure Spreader.
PARTS & SERVICE PARTS & SERVICE As the purchaser of your new Spreader, it is very important to consider the following factors: A. Original Quality B. Availability of Service Parts C. Availability of Adequate Service Facilities Art’s-Way Manufacturing Co., Inc. has an excellent dealership network ready to answer any questions you may have about your Spreader.
TABLE OF CONTENTS TABLE OF CONTENTS TO THE OWNER SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT NOTICE Art’s-Way Manufacturing Co., Inc. STATEMENT OF PRODUCT LIABILITY IMPORTANT WARRANTY INFORMATION LIMITATIONS OF THIS MANUAL PARTS & SERVICE TABLE OF CONTENTS LIMITED WARRANTY SAFETY FIRST NOTICES OF DANGER, WARNING, AND CAUTION Safety Instructions...
TABLE OF CONTENTS LIMITED WARRANTY FOR NEW ART’S WAY MANUFACTURING CO. FARM MACHINERY (U.S. ONLY) LIMITED WARRANTY FOR NEW ART’S WAY MANUFACTURING CO. FARM MACHINERY GENERAL PROVISIONS: Art’s Way Manufacturing Co., Inc. (Art’s Way Mfg.) warrants the products it sells to be free from defects in material and workmanship for the periods of time set forth in the Warranty Table below.
Art’s-Way Manufacturing Co., Inc. strives to make our equipment as safe as possible. The Art’s- Note: Contains additional information important Way V180 Manure Spreader conforms to applicable to a procedure and will be found within the safety standards at the time of manufacturing. A regular text body of this manual.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS GENERAL Safety Alert Symbols This is the safety alert symbol. It Most work related accidents are caused is used to alert you to potential by failure to observe basic safety rules personal injury hazards. Obey all or precautions.
SAFETY INSTRUCTIONS BEFORE OPERATING Keep all shields and guards in place and in good working condition. SAFETY INSTRUCTIONS Keep all bystanders, especially children, away from Spreader while Do not wear loose fitting clothing as it may operation. catch in moving parts. Do not allow riders while the Spreader is in Make sure all guards and shields are operation.
SAFETY INSTRUCTIONS HYDRAULIC SAFETY Make sure the Slow Moving Vehicle (SMV) emblem and all lights and reflectors required by local highway and transportation SAFETY authorities are properly in place, clean, and INSTRUCTIONS clearly visible to traffic. Follow all operating, maintenance, and safety instructions found in this Manu- Do not allow riders on any machinery during transport.
SAFETY INSTRUCTIONS TIRE SAFETY ASSEMBLY SAFETY SAFETY SAFETY INSTRUCTIONS INSTRUCTIONS Follow all operating and safety instruc- Follow all assembly, operating, and tions found in this manual when work- safety instructions found in this manu- ing around tires. al when assembly this equipment. Have only a qualified tire dealer or tire Use adequate manpower to perform repair service perform tire repairs.
Page 14
SAFETY INSTRUCTIONS THIS PAGE LEFT INTENTIONALLY BLANK Manual No. H610120 ART’S-WAY MANUFACTURING COMPANY, INC.
Page 35
ILLUSTRATED PARTS LIST: MANURE SPREADER ITEM NO. PART NUMBER DESCRIPTION QTY. H610127 V SERIES TANDEM ASM 600330 WASHER,FLAT 3/4 600340 BOLT, HHCS 036800 LW 3/4” SAE MED 600320 NUT, SERRATED FL ART’S-WAY MANUFACTURING COMPANY, INC. Manual No. H610120...
ILLUSTRATED PARTS LIST: MANURE SPREADER TANDEM WHEELS ASSEMBLY Manual No. H610120 ART’S-WAY MANUFACTURING COMPANY, INC.
Page 37
ILLUSTRATED PARTS LIST: MANURE SPREADER ITEM NO. PART NUMBER DESCRIPTION QTY. H160007 AXLE (TANDEM) H610124 TANDEM BEAM ASSY, LEFT H160009 PIVOT PIN ASSY H610126 TANDEM BEAM ASSY, RIGHT H160017 SPINDLE PIN ASSY (TANDEM) H160052 V SERIES HUB/SPINDLE HN69-07-4019 WHEEL, 16R20 USED HZ85-03-2080 BOLT, HEX, 1-1/4”...
ILLUSTRATED PARTS LIST: MANURE SPREADER TANDEM WHEELS - WHEEL ASSEMBLY Manual No. H610120 ART’S-WAY MANUFACTURING COMPANY, INC.
Page 39
ILLUSTRATED PARTS LIST: MANURE SPREADER ITEM NO. PART NUMBER DESCRIPTION QTY. HN69-07-4073 20.5 X 25 TIRE HN69-07-4074 HD SPLIT RIM, 10-BOLT 606100 L RING, WHEEL LOCKING ART’S-WAY MANUFACTURING COMPANY, INC. Manual No. H610120...
ILLUSTRATED PARTS LIST: MANURE SPREADER SPREADER ASSEMBLY UPDATED W/NEW GEARB NEW RELEASE ON SOLID DESCRIP REVISI NOTE: DO NOT SCA EXCEPT AS MAY BE OTHERWISE PR CONTRACT. THESE DRAWINGS AND CATIONS ARE THE PROPERTY OF AR MFG. CO., ARE ISSUED IN STRICT C AND SHALL NOT BE REPRODUCED O OR USED AS THE BASIS FOR THE Manual No.
Page 47
ILLUSTRATED PARTS LIST: MANURE SPREADER ITEM NO. PART NUMBER DESCRIPTION QTY. H160002 REAR GANG H160006 SHAFT,APRON R66305 KEY, SQUARE 1/2” X 2” HC14-00-3122 MOTOR, HYD EATON 2000 SE HM08-56-3077 SPROCKET, 667 8T H15560 TORQUE PLATE HO74-01-5069 GEARBOX, BERMA, RIGHT ANGLE 005370 WASHER, LOCK 1/2 H4138...
Page 48
ILLUSTRATED PARTS LIST: MANURE SPREADER SRT18/21 CODE Fig. Ref. 1 14250 Gearb 2 14790 Right 3 14791 Left pa 3489 Screw 1799 Nut M 9156 Screw 7 14792 Cross 9905 UCFC 3311 Screw 10 14788 Right 11 14789 Left be 12 14627 Left bl 13 14054...
Page 49
ILLUSTRATED PARTS LIST: MANURE SPREADER ITEM NO. PART NUMBER DESCRIPTION QTY. H14250 GEARBOXES SRT18/2100 H14790 RIGHT PANEL H14791 LEFT PANEL H3489 SCREW, HEX-HD M14X45 H1799 NUT M14 H9156 SCREW, HEX-HD M18X45 H14792 CROSS BAR H9905 UCFC 208 Ø40 H3311 SCREW, HEX-HD M14X40 H14788 RIGHT BEATER H14789...
ILLUSTRATED PARTS LIST: MANURE SPREADER HYDRAULICS ASSEMBLY Manual No. H610120 ART’S-WAY MANUFACTURING COMPANY, INC.
Page 65
ILLUSTRATED PARTS LIST: MANURE SPREADER ITEM NO. PART NUMBER DESCRIPTION QTY. HW25SDA008030 WORM GEAR DRIVE HC47-00-3123 MOTOR, HYD EATON H-SERIES 11.3 CU IN 4 BOLT 1" KEYED HC67-04-3137 VALVE, FLOW CONTROL 10 ORB HC67-04-3196 VALVE, FLOW CONTROL 3/4-NPT HT54-45-1012 ADAPTER, HYD, #10 STRAIGHT UNION X 3/4" MALE PIPE HT54-46-1012 CONNECTOR, #10 MALE JIC X 3/4"...
ILLUSTRATED PARTS LIST: MANURE SPREADER HYDRAULICS ASSEMBLY - (CONTINUED) Manual No. H610120 ART’S-WAY MANUFACTURING COMPANY, INC.
Page 67
ILLUSTRATED PARTS LIST: MANURE SPREADER ITEM NO. PART NUMBER DESCRIPTION QTY. HC21-01-3116 CYLINDER, HYD 2” X 24” STROKE HT52-77-0606 BULKHEAD, 90 DEGREE 9/16”-18 X 9/16”-18 HT52-90-0606 BULKHEAD, ADAPTER NUT 9/16”-18 HT52-79-0606 BULKHEAD, RUN TEE 9/16”-18 X 9/16”-18 X 9/16”-18 HT55-73-0808 PIONEER TIP, 3/4-16, M H160092/H160098 HOSE, BOTTOM HYD CYLINDER (SLOP GATE) (18’...
Page 68
ILLUSTRATED PARTS LIST: MANURE SPREADER THIS PAGE LEFT INTENTIONALLY BLANK Manual No. H610120 ART’S-WAY MANUFACTURING COMPANY, INC.
Page 72
ILLUSTRATED PARTS LIST: MANURE SPREADER NOTES: Manual No. H610120 ART’S-WAY MANUFACTURING COMPANY, INC.
Page 73
ILLUSTRATED PARTS LIST: MANURE SPREADER NOTES: ART’S-WAY MANUFACTURING COMPANY, INC. Manual No. H610120...
Page 74
ILLUSTRATED PARTS LIST: MANURE SPREADER Manual No. H610120 ART’S-WAY MANUFACTURING COMPANY, INC.
Page 75
ILLUSTRATED PARTS LIST: MANURE SPREADER ART’S-WAY MANUFACTURING COMPANY, INC. Manual No. H610120...
Page 76
Art’s-Way Manufacturing Co., Inc. TECHNICAL MANUALS Manuals are available from your local dealer or Art’s-Way Manufacturing Co., Inc. for the operation, service, and repair of your machine. For prompt convenient service, contact your local dealer for assistance in obtaining the manuals for your machine. Your local dealer can expedite your order for operator manuals, illustrated parts catalogs, service manuals, and maintenance records.
Need help?
Do you have a question about the V180 and is the answer not in the manual?
Questions and answers