Page 3
BEFORE YOU BEGIN Carefully unpack package contents to make sure all parts are present Some assembly is required. @(¥)8@ 8�® GGGG (1) 2-Prong Adapter (1) Remote (1) Light Projector (1) Ground Stake with (1) Allen Key Attachment Screw DO NOT PLUG IN LASER UNIT UNTIL PROMPTED IN THE STEPS BELOW If you already have, unplug it now and follow the steps below in order.
Page 4
Angle Angle adjustment adjustment Weather Resistant Cap screw screw Assembly dia gra m 1 Assembly diagram 2 First, install the included two 3A battery in the remote. To test the remote's battery connection, press any button and the LED will illuminate for 1 second.
Page 5
5. Timer presets (2,4,6,8 hours): Press this will turn the unit ON and go into standby Mode after# hours. Timer settings will be saved until "timer reset" button is pushed or if the projector unit is unplugged. A triple-flash indication from the projector will confirm your timer setting.
Page 6
NOTES: • Only use supplied transformer connected to a properly grounded outdoor outlet. • Do not use with dimmers. ° ° ° ° • Operate in temperatures of -26 C to 32 C (-15 F to 90 F). There will be a °...
Need help?
Do you have a question about the 204939 and is the answer not in the manual?
Questions and answers