Table of Contents
Advertisement
Quick Links
BTK-27 Bluetooth Stereo Headset User Manual
BASIC OPERATIONS
Turning the headset on/off
1. To turn the headset on
Put "On/off" Button to on, and you will hear a voice "Power on". The headset is now turned on.
2. To turn the headset off
Put "On/off" Button to off, and you will hear a voice "Power off". The headset is now turned off.
Pairing
Before using your headset for the first time, you must pair it with your Bluetooth devices.
1. Ensure that the headset is turned on (see "To turn the headset on" section). And the Bluetooth devices setting
are activated.
2. Press and hold the "MFB
and you will hear a voice "Pairing", now the headset is under pairing mode.
3. Set your Bluetooth devices to discover the headset by following your devices' guide. Typically, the steps involve
going t o a 'Setup', ' Connect', o r ' Bluetooth' menu on y our devices and t hen se lecting t he o ption t o di scover
Bluetooth devices.
4. Your devices will find the headset "BTK-27" and ask if you want to pair with it. Confirm this by pressing the
"Yes" or "OK" key.
5. Enter a passkey or PIN code "0000" (4 zeros), then press the "Yes" or "OK" key.
Note: If the Bluetooth version of your Bluetoot devices is up Bluetooth V2.1, you do not need to enter a Passkey
(Pin code) during above pairing process.
6. You will hear a voice "connected", it means your devices have been connected with the headset.
IMPORTANT: If the pairing can't be completed within 90 seconds while the pairing mode is activated,
which means the pairing is unsuccessful, please repeat Step 1 to Step 6 to pair the headset with the
Bluetooth devices again.
Pairing Your Headset with Two Bluetooth Devices (Multipoint connecting)
BTK-27 supports a Multipoint function to allow simultaneous pairing of the headset with two Bluetooth
devices.
1. Follow t he pairing pr ocedure as instructed in "Pairing" section t o p air t he h eadset with t he f irst B luetooth
device.
2. Repeat the same pairing procedure on the second Bluetooth device.
3. On the first Bluetooth device's menu, activate its Bluetooth connection with the headset.
On/off Button
MFB Button
PREV Button
VOL- Button
" Button for about 4 seconds until the indicator light alternately flashes blue and red,
VOL+ Button
Play/pause Button
Next Button
1
Advertisement
Table of Contents
Related Manuals for Syska BTK-27
Summary of Contents for Syska BTK-27
- Page 1 ‘Setup’, ' Connect', o r ‘ Bluetooth’ menu on y our devices and t hen se lecting t he o ption t o di scover Bluetooth devices. 4. Your devices will find the headset “BTK-27” and ask if you want to pair with it. Confirm this by pressing the “Yes” or “OK” key.
- Page 2 Play/Pause 1. Make sure that your devices connected with the headset. 2. Find music in your devices and play, the song will play through the headset. 3. Press “Play/Pause” button once when play, the song will stop. Press “Play/Pause” button again, the song will play again.
- Page 3 feature will be available on only one mobile phone which is firstly connected with mobile phone. Rejecting an incoming call Press and hold “MFB” Button for 2 seconds to reject a call. Transferring a call Headset to phone: Press and hold “MFB” Button for 2 seconds during a call, then release it. Phone to headset: Press and hold “MFB”...
- Page 4 (Waste Electrical & Electronic Equipment)This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Need help?
Do you have a question about the BTK-27 and is the answer not in the manual?
Questions and answers