Advertisement
LAUNCH
Precautions:
The socket-outlet shall be installed near the equipment and shall be easily accessible.
The golo3 is a precision electronic instrument. Observe caution when handing the module. Dropping
the module can cause damage.
Make sure that the connection between the golo3 module and DLC socket is secure and reliable
when in use,
GPRS transmission speed depends on mobile network, communication timeout failure would be
occurred when network is busy (such as major festivals), and it also prone to happen in remote areas,
Launch would not responsible for any consequences occurred by this failure.
ODB program is pre-installed in the factory; please go into
diagnostic software corresponding with your vehicle.
Turn off the ignition switch when connecting or disconnecting the golo3 module to the vehicle's OBD
II Diagnostic Linking Connector (DLC).
http://mycar.x431.com/
iii
golo3 User Manual
to download the
Advertisement
