Sensity Systems NetSense LSNM-0001-A Reference Manual

Reference Guide – NetSense Platform Network Module
Overview
The Sensity Systems NetSense platform introduces an open architecture-based Light Sensory Network
that can be deployed at the same time as Sensity LED retrofits and new LED luminaires.
The NetSense platform leverages standards-based IPv4/6 (Internet Protocol version 4 or 6) data
transports that support a variety of application-specific sensors and software analytics to deliver multi-
service capabilities at each LED retrofit/new luminaire.
Savings derived from converting to LED lighting help fund the deployment of this sophisticated platform,
which enables light owners to leverage their investment in LEDs by running a variety of software
applications, spanning both lighting-specific and non-lighting-related services.
Electrical Specifications
 AC Input: 100-277 VAC, Max current up to 10A
Environmental Specification
 Operating Temperature: -20C to 65C
 Storage Temperature: -20C to 85C
 Enclosure Suitable for Damp Locations, not directly exposed to outdoor elements
Antenna Specification
 External antenna installation is constrained to any Omni-directional antenna rated ≤ 6dbi and
supporting 2.4/ 5GHz frequencies. Antenna specification is provided only by Sensity engineering
and has been validated to meet the requirements imposed by FCC through testing.
Installation Guidelines
 NetSense Platform Network Module (LSNM-0001-A) must only be installed into outdoor, non-
residential locations.
 Installation is only allowed into approved Sensity Systems luminaires
 Module must be installed into a downward facing position relative to ground
 Only professional installation is allowed through Sensity authorized factories
Serviceability
 There are no serviceable items within the module. Per FCC requirements, the unit cannot be
serviced by any end user; regardless if in-warranty or out of warranty.
If the unit is malfunctioning or causing interference with existing radio devices;
o Determine cause of interference and remove suspect device from service
o Contact Sensity Systems Customer Service at 1-855-500-SENS (7367)
P
ROPRIETARY
PAGE 1 OF 5