SECTION I GENERAL DESCRIPTION LIGHTNING STRIPPER The Lightning is operated by a propane (LPG) powered engince, driving a tendem hydrostatic pump system, creating a (skid-steer) zero turn radius drive train. Suface coverings and coatings are removed by lowered a weighted blade onto the surface and moving forward under a high torque drive system.
Wear proper eye and ear protection and heavy duty work gloves at all times. Practice good Preventative Maintenance. Practice good housekeeping Allow the Lightning to come to a complete stop, turn off engine and chock rear wheels before performing any maintenance procedures Replace worn parts when necessary.
Page 9
Flooring on 1800 356 673 for free replacement prior to operating the machinery. The Lightning is not a toy. All operators must be over 18 years of age age and must have read and reviewed the safety and procedures manyual before operating the machinery.
START-UP and BREAK-IN LIGHTNING STRIPPER The Lightning has been safety tested and run at our factory prior to shipping. All fluid levels have been topped up; however no propane (LPG) has been added to the tanks for saftey shipment purposes. Before running the Lightning please check the following items that may have shifted or changed during shipping.
3 diagrams depicting the TOP, LEFT and RIGHT views of the machine. These drawings show the activation of all moving parts of the Lightning. To move the machine: using the right hand, slowly move the shifter lever in the desired direction.
Need help?
Do you have a question about the Lightning and is the answer not in the manual?
Questions and answers