Special Information For Windows Nt Users - Iomega Zip 100 User Manual

Special Information for
Windows NT Users
How to Install or Reinstall Iomega Software
IMPORTANT! You must have administrator privileges for your local
computer in order to install software drivers under Windows NT. You
must also have administrator privileges for your computer to run the
ToolsNT utilities.
To install your Iomega software, insert the 100MB "tools" disk that came
with your system into the Zip drive, and insert the Iomega Install diskette
for Windows NT into the computer's floppy drive. You may need to run
SetupNT.exe twice from the Install diskette – once to install the Iomega
Zip IDE /ATAPI driver, the second time to install ToolsNT software.
Reinstalling Windows NT: If you reinstall Windows NT, you must
also reinstall the Iomega ATAPI driver and ToolsNT software. If you do
not reinstall the Iomega software, disks will not format correctly in your
Zip drive and/or the Zip drive will appear as a floppy drive (b:).
Installing Iomega Software under Windows NT 4.0:
1. Run a:\setupnt.exe from the Windows NT Install diskette.
•
If the SetupNT program is unable to locate the "tools" disk, make
sure it is fully inserted and click "OK." If SetupNT is still unable to
locate the "tools" disk, click "OK" again and SetupNT will
automatically open the "SCSI Adapters" Control Panel so that you can
install the Iomega Zip IDE/ATAPI driver.
**
interface as SCSI adapters.
•
If the necessary driver is already present on the system, SetupNT
will be able to locate the "tools" disk and install ToolsNT software.
After Windows NT reboots, the Zip ATAPI drive will be ready to use.
2. Select the "Drivers" tab and click the "Add" button.
3. When the list of Iomega adapters appears, double-click the Iomega
Zip IDE /ATAPI driver.
4. Choose "Current" in the Windows NT dialog box. Windows NT
will then add the Zip ATAPI driver to the list of installed drivers
found on your system.
5. At the next Windows NT dialog box, select "Yes" to reboot the
system. Remove the Install diskette from the floppy drive while
Windows NT reboots.
6
NOTE: Windows NT installs drives or adapters that use the IDE
**
Continue to step 2.