Summary of Contents for M2 Optics Fiber Lab 1600
- Page 1 M2 Optics, Inc., 100 Parksouth Lane, Holly Springs, NC 27540 T: 866-269-2902 Fax: 919-341-1672 Fiber Lab 1600 Operating Manual Fiber Lab 1600, Rev. 2 - 1 -...
- Page 2 M2 Optics, Inc., 100 Parksouth Lane, Holly Springs, NC 27540 T: 866-269-2902 Fax: 919-341-1672 Table of Contents 1.0) Safety Page 3 2.0) Technical Data page 3 3.0) Design page 4 4.0) Set Up and Operation page 5 5.0) Maintenance page 6 6.0) Warranty...
- Page 3 Fiber Lab 1600 remain covered when not in use to avoid direct viewing. Several important safety steps should be taken whenever the Fiber Lab 1600 is used with an optical source.
- Page 4 (6 in. W) X (10 in. H) X (10 in. D) in size. The weight of the Fiber Lab 1600 will vary depending on the fiber attenuations/lengths specified. However the maximum weight with one 8 dB attenuations/25 km length will not exceed 7 pounds or 3 kilograms.
- Page 5 If you decided to set up your system to use both canisters, you would connect your source to one end of the first Fiber Lab 1600 canister, patch the other end of the first canister to one end of the second canister and patch your receiver to the other end of the second canister as shown.
- Page 6 • Use in a dust free environment to minimize any buildup on connectors and adapters. If the Fiber Lab 1600 needs repair and it is within the warranty period, contact M2 Optics, Inc. for a return material authorization (RMA) prior to shipping the unit.
- Page 7 The Fiber Lab 1600 product will provide years of trouble free service. We hope you enjoy it and recommend the product to others.
Need help?
Do you have a question about the Fiber Lab 1600 and is the answer not in the manual?
Questions and answers