Table of Contents
Advertisement
THAnK yOu FOR CHOOSInG THE STAnlEy GuARD ACCESS COnTROl SySTEm.
• Keeping your valuable equipment safe and accounted for is crucial.
• the neW locK is the best Way to control your Job site.
• the locK is easily programmed to open up during set hours and only to the
authorized WorKers With user tags.
• the log registers the entries.
• softWare and mobile application enabels managing WorKers details and
controlling the locK*.
SET uP AnD InSTAllATIOn
1. please copy and keep the code marked on the key.
2. In case of key is lost, contact the customer service to order a new one. you will need to advise the code.
3. There is a spare key so you can also duplicate the key.
4. In case there is no key and also no code is at hand - the cylinder will need to be replaced.
please contact customer service to send your lock to be fixed or arrive there to do so.
InSTAllInG THE
BATTERy
3
remove battery cover.
02
1
Insert the mechanical key and
rotate it clockwise till lock is opened.
4
insert cr123a batteries. make sure
that battery (-) is facing the springs.
* software not included/ mobile application included
2
open the screw beneath the latch.
5
Place battery cover back on and
close the screw tightly in clockwise
direction.
6
the lock is ready for operation.
with
the ACS BT
Advertisement
Table of Contents
